IOGear GCS1772 user manual Plug one of the included KVM cables to the CPU port

Page 13

Installation

Step 3

Plug one of the included KVM cables to the CPU port

Step 4

Plug the other end of the KVM cable to the respective ports on the computer that is part of your installation.

Step 5

Repeat steps 3 and 4 for any other computers you

are connecting

Step 6

Plug the USB peripherals that you want to be part of your KVM setup into the front USB hub ports

Step 7

Plug network cable coming from your router to any

11

Image 13

Contents Port Multi-Function USB 2.0 KVM Switch Iogear WelcomeTable of Contents Package Contents Overview Features Console System RequirementsComputer AudioPort selection buttons IntroductionPorts LEDs KVM LEDsUSB Hub Ethernet LEDsPower Jack Firmware upgrade portEthernet port Console Audio jackCPU Console portCable Before you Begin InstallationStep Plug one of the included KVM cables to the CPU port Turn on the power to the computers Operation Powering Off and RestartingHot Plugging Port ID NumberingPort Switching Hotkey Operation Hotkey OperationHotkey Operation Auto Scanning Invoking Hotkey Mode To invoke Hotkey Mode MAC keyboards Hotkey Operation Change Port Switching Keys Change Hotkey Mode Invocation KeysSet Keyboard Operating Platform Disable Port Switching Keys USB ResetFirmware Upgrade Mode Hotkey Beeper ControlHotkey Default Settings Restore Default SettingsMAC Keyboard Emulation Sun Keyboard Emulation Ethernet switch Ethernet SwitchKVM Connect ComputersFirmware Upgrade Utility Firmware Upgrade Utility Starting the Upgrade Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Recovery Firmware Upgrade Utility Specification SpecificationSpecification Technical Support Radio &TV Interference Statement Limited Warranty Contact info