IOGear GCS1772 user manual Port Switching

Operation

Port Switching

There are two ways to access the computers in your KVM setup:

·Manual switching – pressing the push-buttons on the unit’s front panel

·Hotkey switching – entering commands from the keyboard

Manual Switching

1.Switch console only - Press selection button for less than two (2) seconds to bring only the KVM focus to the computer attached to its corresponding port

2.Switch everything - Press selection button for

longer than four (4) seconds to bring KVM, Audio, and USB Hub focus to the computer attached to its corresponding port.

3. Press and hold port selection switches 1 and 2 for more than two seconds to start Auto Scan Mode.

Tip: To stop Auto Scan mode, simply press any of the port selection switches on the KVM.

14