IOGear GCS1772 user manual Turn on the power to the computers

Page 14

Installation

of the Ethernet ports on the switch, and plug network cables to each of your computer’s Ethernet ports

Step 8

Plug the power adapter cable into the switch’s power jack, then plug the power adapter into an AC power source

Step 9

Turn on the power to the computers

12

Image 14

Contents Port Multi-Function USB 2.0 KVM Switch Welcome IogearTable of Contents Package Contents Overview Features Computer System RequirementsConsole AudioPorts LEDs IntroductionPort selection buttons KVM LEDsEthernet LEDs USB HubEthernet port Firmware upgrade portPower Jack Console Audio jackCable Console portCPU Step InstallationBefore you Begin Plug one of the included KVM cables to the CPU port Turn on the power to the computers Hot Plugging Powering Off and RestartingOperation Port ID NumberingPort Switching Hotkey Operation Hotkey OperationHotkey Operation Auto Scanning Invoking Hotkey Mode To invoke Hotkey Mode MAC keyboards Hotkey Operation Change Hotkey Mode Invocation Keys Change Port Switching KeysSet Keyboard Operating Platform Firmware Upgrade Mode USB ResetDisable Port Switching Keys Hotkey Beeper ControlRestore Default Settings Hotkey Default SettingsMAC Keyboard Emulation Sun Keyboard Emulation Ethernet Switch Ethernet switchConnect Computers KVMFirmware Upgrade Utility Firmware Upgrade Utility Starting the Upgrade Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Recovery Firmware Upgrade Utility Specification SpecificationSpecification Technical Support Radio &TV Interference Statement Limited Warranty Contact info