IOGear GCS1772 user manual Firmware Upgrade Utility

Page 32

The Firmware Upgrade Utility

4.Shut down the computers on your MiniView™ installation and make sure you have set the KVM in

firmware upgrade mode as instructed under section Hotkey operation → Firmware upgrade mode

5.Make sure the power is plugged into the KVM.

Once the power is plugged in and the switch is set to upgrade, all of the amber lights on the KVM will flash once per second. Now you are ready to run the firmware upgrade utility.

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Port Multi-Function USB 2.0 KVM Switch Welcome IogearTable of Contents Package Contents Overview Features System Requirements ConsoleComputer AudioIntroduction Port selection buttonsPorts LEDs KVM LEDsEthernet LEDs USB HubFirmware upgrade port Power JackEthernet port Console Audio jackCable Console portCPU Step InstallationBefore you Begin Plug one of the included KVM cables to the CPU port Turn on the power to the computers Powering Off and Restarting OperationHot Plugging Port ID NumberingPort Switching Hotkey Operation Hotkey OperationHotkey Operation Auto Scanning Invoking Hotkey Mode To invoke Hotkey Mode MAC keyboards Hotkey Operation Change Hotkey Mode Invocation Keys Change Port Switching KeysSet Keyboard Operating Platform USB Reset Disable Port Switching KeysFirmware Upgrade Mode Hotkey Beeper ControlRestore Default Settings Hotkey Default SettingsMAC Keyboard Emulation Sun Keyboard Emulation Ethernet Switch Ethernet switchConnect Computers KVMFirmware Upgrade Utility Firmware Upgrade Utility Starting the Upgrade Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Utility Firmware Upgrade Recovery Firmware Upgrade Utility Specification SpecificationSpecification Technical Support Radio &TV Interference Statement Limited Warranty Contact info
Top Page Image Contents