IOGear GCS1772 user manual Change Hotkey Mode Invocation Keys, Change Port Switching Keys

Hotkey Operation

Change Hotkey Mode Invocation Keys

In case the default Hotkey Mode invocation keys (Num Lock and Minus [-]) are not optimal in your setup, you may change them to Ctrl and F12, respectively.

To switch to an alternate Hotkey Mode invocation, do the following:

1.Invoke Hotkey Mode

2.Press and release H

3.This will change the Hotkey Mode invocation key to Ctrl and F12 (instead of Num Lock and Minus).

Note: This procedure is a toggle between the two methods. To revert back to the original HSM invocation keys, repeat the above procedure again.

Change Port Switching Keys

The port switching activation keys can be changed from tapping Scroll Lock key twice ([Scroll Lock] [Scroll Lock]) to tapping Ctrl twice [Ctrl] [Ctrl].

To change the port switching activation keys, do the following:

1.Invoke Hotkey Mode

2.Press and release T

3.The new port switching key will be [Ctrl], [Ctrl]

Note: This procedure is a toggle between the two methods. To revert back to the original port switching keys, repeat the above procedure.

21