IOGear 8-port dvi kvmp switch user manual

Page 11

4.Plug your secondary microphone and speakers into the console audio ports located on the unit’s rear panel.

5.Using the custom USB DVI KVM cable set provided with this package, plug the DVI connector into any available DVI socket in the KVM port section of the switch, then plug the accompanying USB and audio connectors into their corresponding USB, microphone, and speaker sockets.

6.At the other end of the cable, plug the USB, video, microphone, and speaker cables into their respective ports on the computer.

4

5

Note: Verify that all the plugs

 

are in the same KVM Port

6

sockets (all in Port 1, all in

Port 2, etc.).

 

7.Plug your USB peripherals into the type A sockets in the USB hub section.

8.Plug the power adapter that came with your switch into an AC power source, then plug power adapter cable into the switch’s Power Jack.

8 7

9. Turn on the power to the computers.

11

Image 11
Contents Port DVI Kvmp Switch with VGA support Page Table of Contents Introduction System Requirements Package ContentsBack view OverviewFront view Rack Mounting Foot Pad Set InstallationFinal Step StepConsole Monitor Connection Options Single Level Installation Page Level Installation Cascading Level Installation Cascading Multiview installation Port ID Numbering Port SwitchingPort LED Indication OSD Main Screen OSD LoginOn-screen Display OSD Operation Trigger OSDOSD Function OSD Main Screen HeadingsOSD Navigation F1 Goto F1 GotoF2 List F2 ListPort ID Display Position F3 SETF3 SET OSD HotkeyScan Duration Port ID Display ModeScan-Skip Mode OSD Language Hotkey Command ModeScreen Blanker HotkeyF4 ADM Set User LoginF4 ADM Set Accessible Ports Edit Port Names Set Logout TimeoutSet Quick View Ports Restore Default ValuesActivate Beeper Clear The Name ListSet Operating System Firmware UpgradeSet Computer Video Input Keyboard LanguageMouse Emulation Set Console Video OutputF5 SKP F5 SKPF7 Scan F6 BRCF7 Scan F6 BRCF8 Lout F8 LoutFor Mac users, Control and F12 keys are more convenient Invoke Hotkey ModeHotkey Port Control Selecting the Active Port Auto Scan Mode SwitchingEnable / Disable Mouse Emulation Skip Mode SwitchingComputer Keyboard / Mouse Reset Restore the OSD Default Values Setting the Quick HotkeySetting the OSD Hotkey Setting the Port Operating SystemHotkey Summary Table USB ResetVideo DynaSync Key Function Hotkey Summary TableSun Keyboard Emulation Mac Keyboard EmulationFirmware Upgrade Factory Default SettingsStep Final Step Upgrade Fail Restore Factory Default Settings SJ/T Federal Communications Commission FCC StatementCE Compliance Iogear Limited WarrantyContact This Page is Intentionally Left Blank Iogear