IOGear 8-port dvi kvmp switch user manual Port ID Display Mode, Scan Duration, Scan-Skip Mode

Port ID Display Mode

This function allow you to choose the way you want to show the ports in the OSD main screen – port number only, port name only or both. Simply move the red highlight bar to the option that you like to use and press [Enter]. Then, press [Esc] to exit from this function.

Scan Duration

This function allows you to set the autoscan time interval between 0 second to 255 seconds (5 second is set by default). Simply enter the number between 0-225 and press [Enter]. Then press [Esc] to exit from this function.

Scan-Skip Mode

This function allows you to set the behavior in autoscan mode. Simply move the red highlight bar to the behavior you want and press [Enter]. Then, press [Esc] to exit from this function.

Function All

Quick

View

Powered

ON

Quick

View +

Powered

ON

Description

Scan all ports that the administrator has set as accessible for the current logged in user

Scan only the ports that have been set as quick view ports (This option will only show up for administrator account)

Scan only the ports that have been powered on

Scan only the ports that have been set as quick view ports and they have been powered on

21