IOGear 8-port dvi kvmp switch user manual F3 SET, OSD Hotkey, Port ID Display Position

F3: SET

F3: SET

Clicking the F3 field or pressing [F3] to activate the SET function. There are 10 different settings within the SET section. They are shown as follow:

OSD Hotkey

Port ID Display Position

Port ID Display Duration

Port ID Display Mode

Scan Duration

Scan-Skip Mode

Screen Blanker

Hotkey Command Mode

Hotkey

OSD Language

OSD Hotkey

This function allows you to switch the way to trigger the hotkey between [Scroll Lock] [Scroll Lock] and [Ctrl] [Ctrl]. Simply move the red highlight bar to the hotkey setting that you would like to choose and press [Enter]. Then press [Esc] to exit from this function.

Port ID Display Position

This function allows you to change the position of the port ID that’s showing on the screen as the image below. Simply change the position by using the up, down, left and right arrows to adjust to the place that you want the port ID to show in the future and press [Enter]. Then press [Esc] to exit from this function.

Port ID Display Duration

This function allows you to change the port ID display duration between 3 Seconds and OFF. Simply move the red highlight bar to the option that you would like to choose and press [Enter]. Then, press [Esc] to exit this function.

20