Once the user name and password are set correctly, you will see the message in the bottom of the screen indicating the setup is OK. Then simply press [Esc] to exit from the function.
Set Accessible Ports
This function allows the administrator to setup the access on each port for each user. Use [Spacebar] to cycle through all the entries and press [Enter] to complete the setup. Then, press [Esc] to exit from the function.
Function
F(Full) V (View)
(Blank)
Description
User has full access on the specific port
User can only view the port with no access for the specific port
User cannot view nor access for the specific port
24