IOGear 8-port dvi kvmp switch user manual Hotkey Summary Table, Key Function

Page 38

Hotkey Summary Table

After invoking Hotkey mode (see page 33), key in one of the following keys to perform the corresponding function:

Key

Function

[PN] [Enter]

Switches KVM, Audio, and USB focus directly to the computer that cor-

 

responds to that port ID. (PN = port number)

 

 

[PN] [K] [Enter]

Switches KVM focus only directly to the computer that corresponds to that

 

port ID. (PN = port number)

 

 

[PN] [U] [Enter]

Switches USB focus only directly to the computer that corresponds to that

 

port ID. (PN = port number)

 

Note: This hotkey functions on the first level of an installation only.

 

 

[A] [Enter]

Starts Auto Scan. The KVM focus cycles from port to port at the default

 

5-second intervals

 

 

[A] [n] [Enter]

Starts Auto Scan at n-second intervals (n = 1–255 seconds)

 

 

[H]

Toggles between the default ([Num Lock] [-]) and alternate ([Ctrl] [F12]) HSM

 

invocation keys.

 

 

[T]

Toggles between the default ([Scroll Lock] [Scroll Lock]) and alternate ([Ctrl]

 

[Ctrl]) Port Switching keys.

 

 

[F1]

Sets the port OS to Windows.

 

 

[F2]

Sets the port OS to Mac.

 

 

[F3]

Sets the port OS to Sun.

 

 

[F5]

Performs a keyboard / mouse reset on the target computer.

 

 

[B]

Enables/Disables the buzzer.

 

 

[R] [Enter]

Resets the hotkey settings to their default status. See Factory Default

 

Hotkeys and Settings, page 66.

 

 

[D]

Invokes Video DynaSync, ATEN’s exclusive technology that elimi-

 

nates boot-up display problems and optimizes resolution when

 

switching between ports.

 

 

[M]

Enables/Disables mouse emulation.

 

 

[ ]

Skips to the previous computer on the list, in skip mode.

 

 

[ ]

Skips to the next computer on the list, in skip mode.

 

 

[ ]

Skips to the next accessible port. If the next accessible port has

 

cascaded a switch, then it skips to the first accessible port of that

 

switch, in skip mode.

 

 

[ ]

Skips to the previous accessible port. If the previous accessible

 

port has cascaded a switch, then it skips to the last accessible

 

port of that switch, in skip mode.

 

 

[ESC] or [Spacebar]

Exits hotkey setting mode.

 

 

38

Image 38
Contents Port DVI Kvmp Switch with VGA support Page Table of Contents Introduction Package Contents System RequirementsBack view OverviewFront view Foot Pad Set Installation Rack MountingStep Final StepConsole Monitor Connection Options Single Level Installation Page Level Installation Cascading Level Installation Cascading Multiview installation Port ID Numbering Port SwitchingPort LED Indication Trigger OSD OSD LoginOn-screen Display OSD Operation OSD Main ScreenOSD Function OSD Main Screen HeadingsOSD Navigation F1 Goto F1 GotoF2 List F2 ListOSD Hotkey F3 SETF3 SET Port ID Display PositionScan Duration Port ID Display ModeScan-Skip Mode Hotkey Hotkey Command ModeScreen Blanker OSD LanguageF4 ADM Set User LoginF4 ADM Set Accessible Ports Set Logout Timeout Edit Port NamesClear The Name List Restore Default ValuesActivate Beeper Set Quick View PortsFirmware Upgrade Set Operating SystemKeyboard Language Set Computer Video InputSet Console Video Output Mouse EmulationF5 SKP F5 SKPF6 BRC F6 BRCF7 Scan F7 ScanF8 Lout F8 LoutFor Mac users, Control and F12 keys are more convenient Invoke Hotkey ModeHotkey Port Control Auto Scan Mode Switching Selecting the Active PortEnable / Disable Mouse Emulation Skip Mode SwitchingComputer Keyboard / Mouse Reset Setting the Port Operating System Setting the Quick HotkeySetting the OSD Hotkey Restore the OSD Default ValuesHotkey Summary Table USB ResetVideo DynaSync Hotkey Summary Table Key FunctionMac Keyboard Emulation Sun Keyboard EmulationFactory Default Settings Firmware UpgradeStep Final Step Upgrade Fail Restore Factory Default Settings SJ/T Federal Communications Commission FCC StatementCE Compliance Iogear Limited WarrantyContact This Page is Intentionally Left Blank Iogear