Elation Professional AR-32RM manual Auto/Manual mode, AR-32 Configuration Software Operation

4.Operation

4.1Auto/Manual mode

Press and hold Auto/Manual button down for more 2 seconds to access Auto or Manual function mode. The red indicator indicates the Auto function mode is currently engaged and the blue one illuminates in the Manual function mode.

In Manual mode, user enable to close the current show by pressing and holding OFF button for more 2 seconds until its indicator illuminates.

In Manual Mode, Shows assignments in Pages may refer to the following table:

Object	Show 1	Show 2	Show 3	Show 4	Show 5	Show 6	Show 7	Show 8
Page 1	Show 1	Show 2	Show 3	Show 4	Show 5	Show 6	Show 7	Show 8
Page 2	Show 9	Show 10	Show 11	Show 12	Show 13	Show 14	Show 15	Show 16
Page 3	Show 17	Show 18	Show 19	Show 20	Show 21	Show 22	Show 23	Show 24
								Table 1
Page 4	Show 25	Show 26	Show 27	Show 28	Show 29	Show 30	Show 31	Show 32

4.2. AR-32 Configuration Software Operation

Shows are available configured by performing AR-32 configuration software operations with computer and for further information, please refer to the next accompanying manual of "AR-32 Configuration Software Operation Guide".

4.3 Operation on Remote Controller

User can use AR-32 Remote to control AR-32RM Architectural Show System. These functions of push buttons on the panel of AR-32 Remote are same with ones of your AR-32RM.

4.4. DMX Control Mode

In this mode, SHOWs are available to be controlled and playback by receiving initial DMX address via AR32 configuration software setting. And user may use DMX values to control the desired SHOWs. For further information, please refer to the accompanying table:

DMX Channel Selection	DMX Values & Functions
	0~3 to trigger Show 1;
	4~7 to trigger Show 2;
Starting Channel	8~11 to trigger Show 3;
	.............
	124~127 to trigger Show 32;
	129~255 to close Show.
	0~79 to Pause;
Starting Channel	80~159 to Play;
+1	160~255 to Stop.
Starting Channel	0~127 to Normal Output;
+2	Table 2 128~255 to Blackout.

10