Sybase Version 2.2 manual Setting up Account Management for the pacuser

CHAPTER 2 Upgrading to version 2.2

The PATRIOT Test page should display with the new portlet accessible.

Setting up Account Management for the pacuser

To enable access to each of the PATRIOT portlets for pacuser, you need to modify the properties for each portlet and include the PIUser Role as detailed below. These instruction assume that you are logged in as ‘pso’.

1Select the Admin link on the Welcome bar at the top of the browser to enter Administrative mode.

2From the Select a Page drop down box in the upper right-hand corner of the page, select the PATRIOT Test page.

The PATRIOT Test page appears with the new Account Management portlet accessible.

3For the Account Management portlet, do this:

•Click the Edit link in the title bar and modify the URL property from iiop://yongming-pc:9000

to

iiop://<yourhost>:<yourport>

then click Done.

•From the Select a Page drop down box, select the PATRIOT Test page to return to the Admin Entry Page.

•Select the PATRIOT Test link in the snail trail to navigate back to the PATRIOT Test page

•Select the icon located next to the Edit hyperlink in each of the portlet title bars on the page.

•On the Window Properties panel, select the Edit Portlet Properties link to display the Edit Portlet panel containing the portlet properties.

•In the Portlet Rights section, select the PIUser role from the Role List and click the right arrow to move it to the Roles with Rights to this Portlet list on the right.

•Click Done.

4 Log out of Portal Interface.

Upgrade Guide 25