Silex technology PRICOM SX-300U user manual Smnp Setup, Snmp

Users Manual SX

SMNP Setup

Tab		Item	Explanation	Factory
				Default
	Authentication		Specify the authentication community name for
	community		SNMP. This community name is authenticated when	public
			an SNMP set request is received.
	Trap Community		Specify the trap community of SNMP. This community
			name is used when the print server sends a trap.	public
	Trap Destination Address		Specify the destination IP address of the SNMP trap.
			The value is a four-part series of numbers separated by
			decimal points, such as "xxx.xxx.xxx.xxx". When the	0.0.0.0
			value is "0.0.0.0"(default), this item is disabled and a
			trap will not be generated.
		SysContact	Specify the SysContact of the MIB-II object. The e-mail
SNMP			address of the network administrator is used.	-
		SysName	Specify the SysName of the MIB-II object. The host
			name or domain name of the print server is used.	-
	ParametersII	SysLocation	Specify the SysLocation of the MIB-II object. The	-
			"0 to 255". This value means the longest time of an IP
			location of the print server is used.
		DefaultTTL	Specify the Default TTL of MIB-II object in the range of
	-		packet's existence. Usually the value should be the	255
	MIB
			default.
		Enable Authen	Select whether to allow or disallow the
		Trap	"EnableAuthenTrap" of the MIB-II object. If a violation of
			the community occurs "allow" is the setting, the	ENABLE
			SNMP trap is sent to the IP address specified in
			"TRAP Address".

Appendix 13