Silex technology PRICOM SX-300U user manual Smtp Setup, Tab

Users Manual SX

SMTP Setup

Tab		Item
	Use SMTP Protocol
	SMTP Server Name
	From Address
	To Address
	(1-2)
		Offline
SMTP	Address	Paper out
		Printer error
	to	Check Interval
	Event
		SMTP Port
	SetupAdvanced	Number
		Signature

Explanation	Factory
	Default
Enable/Disable SMTP protocol operations. If
"Disable" is selected, e-mail "send" function is	DISABLE
not available.
Setting SMTP server host name. Enter a domain
name or IP address as host name. If a domain	-
name is used, it is necessary to configure the
DNS server.
Setting the sender address (From Address).
Usually the mail address of the network	-
administrator is set.
Setting mail destination address (To Address).	-
Mail is sent while the printer is off line.	OFF
Mail is sent when the printer is out of paper.	OFF
Mail is sent when abnormal conditions are	OFF
encountered in the printer.
In regular intervals the existence of events is
checked. This interval is defined in minutes. If
more than one event occurs within this interval, a	10
bundled report is sent.
Enter the SMTP port number. It is recommend to
use the default value (=25).	25
Specify the signature string to be added at the	---------------
end of an e-mail.	PRICOM SX-300U
	[00:80:92:XX:XX:XX]
	---------------
	(Name of PRICOM and
	lower 6 digits of
	Ethernet address)

Appendix 15