Silex technology PRICOM SX-300U user manual Apple Talk Setup, Enable

Users Manual SX

Apple Talk Setup

Tab	Item	Explanation	Factory
			Default
	Use AppleTalk	Enable/ Disable AppleTalk Protocol operations.	ENABLE
	Protocol
	Printer Name	Set the AppleTalk printer name. The name set here	PRxxxxxx
		can be seen in the Chooser. The special symbols in
			(Lower 6 digits
		AppleTalk protocol ("="; ":"; "@" and "*") must be
			of Ethernet
		excluded from the string.
			address)
	PostScript Mode	When the PostScript printer supports binary mode,
AppleTalk		PostScript data can be sent in binary. Select BCP
		or TBCP in accordance with the mode of your
		printer. Use TBCP when PS binary data is printed by	ASCII
		a particular printer. Select ASCII (default) when a
		printer other than a PostScript one is connected.
	Zone Name	The print server sets the zone name where it
		belongs. If the value is blank, this product will belong
		to the default zone, set in the AppleTalk Router	*
		within the network.

Appendix 11