Silex technology PRICOM SX-300U user manual Tab Explanation Factory Default

Users Manual SX

Tab		Item			Explanation	Factory
						Default
				NDS Tree	Specify the name of the NDS tree
				Name	connected to. Because the tree name is
					obtained automatically, it is usually
	methodPrinting				unnecessary to specify it here. When there	-
			SetupNDS		are two or more trees on the same network
		PSERVER			it is necessary to specify the name here.
				NDS Context	Specify the NDS context connected to in
					PSERVER mode. The context which
					created the print server on the file server	-
					should be specified here.
				Job management can be performed via NetWare server.
				NetWare Print	Set the name of the print server primarily
NetWare	MethodPrinting		SetupRPRINTER	Server to be	connected to. This product connects to the
				connected	print server set here when operating in
					RPRINTER mode. This product searches	-
					print server automatically and connects if
					the value is blank.
		RPRINTER
				Job Timeout	Set the timeout value (in units of seconds)
					for the print server to determine the end of
					the job when operating in RPRINTER mode.	10
					Usually the value should be the default.
	Printer Name		Set the printer name under print server information within the			PRxxxxxx-Prn1
			NetWare server. It must be the same as the "Printer Name"
			registered in the NetWare server.			(Lower 6 digits
						of Ethernet
						address)

Appendix 10