Silex technology PRICOM SX-300U user manual Using the Print Queue Creation Tool of Turbo Linux

Users Manual SX

Using the Print Queue Creation Tool of Turbo Linux

-This section explains how to print using print queue creation utility of Turbo Linux6.0.

TIP Note that some steps may vary depending on Turbo Linux version.

Example: IP address “192.168.10.100” and Host name “pbox” are registered to etc/hosts file and print queue is to be registered by the name “pboxlp”.

1.Select Main menu, then Turbo Linux tool, then Turbo Centro.

2.Click Turboprintcfg in the Turbo Centro-GT.

3.Click Add in Setting printer screen.

3-1 Select Remote LPD queue in Add printer.

3-2 Type pboxlp in New queue name.

3-3 Click Change in LPD configuration of Change printer configuration. 3-3-1 Type “pbox” in Host name.

3-3-2 Type “lp” in Queue name.

3-4 Click Change in Printer type, then select the printer driver that corresponds with your operating environment.

3-5 Select Paper size and Color depth that correspond with your operating environment.

4.Click OK in the [Printer configuration].

5.Click Save and Finish to complete the configuration.

Using PRICOM in UNIX/Linux Environment 5-25