
Multi-CD Player

Scanning CDs and tracks
While you are using DISC, the beginning of each track on the selected disc plays for about 10 seconds. When you are using
1 Select the repeat range.
Refer to Repeating play on the previous page.
2Touch SCAN on the function menu to turn scan play on.
The first 10 seconds of each track of the cur- rent disc (or the first track of each disc) is played.
3When you find the desired track (or disc) touch SCAN again.
Note
After track or disc scanning is finished, normal playback of the tracks will begin again.
Using ITS playlists
ITS (instant track selection) lets you make a playlist of favorite tracks from those in the
Creating a playlist with ITS programming
You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs. (With
Section
11
1Play a CD that you want to program. Touch a or b to select the CD.
2Touch ITS MEMORY on the function menu.
3Touch c or d to select the desired track.
4Touch MEMORY to store the currently playing track in the playlist.
MEMORY is displayed and the currently play- ing selection is added to your playlist. The dis- play then shows track number again.
Note |
| |
After data for 100 discs has been stored in mem- |
| |
ory, data for a new disc will overwrite the oldest |
| |
one. | Multi- | |
Playback from your ITS playlist | ||
CD | ||
ITS play lets you listen to the tracks that you | ||
Player | ||
have entered into your ITS playlist. When you | ||
| ||
turn on ITS play, tracks from your ITS playlist |
| |
in the |
|
1 Select the repeat range.
Refer to Repeating play on the previous page.
2Touch ITS PLAY on the function menu to turn ITS play on.
Playback begins of those tracks from your playlist within the previously selected
# If no tracks in the current range are pro- grammed for ITS play, then ITS EMPTY is dis- played.
# To turn ITS play off, touch ITS PLAY again.
En 51