Pioneer AVH-P6800DVD Setting remote control code type, Using the preprogrammed function

Other Functions

2Touch ABC to select the desired charac- ter type.

Touch ABC repeatedly to switch between the following character types:

Alphabet (upper case), numbers and symbols

—alphabet (lower case)—European letters, such as those with accents (e.g., á, à, ä, ç)

# You can select to input numbers and symbols by touching 123.

3Touch a or b to select a letter of the al- phabet.

Each time you touch ait will display alphabet, numbers or symbols in ascending order (A B C ...). Each time you touch b it will display a letter in descending order.

4Touch d to move the cursor to the next character position.

When the desired letter is displayed, touch d to move the cursor to the next position and then select the next letter. Touch c to move backwards in the display.

5Touch OK to store the entered title in memory.

6Touch ESC to return to the playback dis- play.

Setting remote control code type

Changing the remote control operation switch to DVD mode enables you to operate the built-

Section

24

in DVD player with the supplied remote con- trol. There are three remote codes for DVD mode, code type A, code type B and code type AVH. However, when operating this unit, use the code type AVH only.

!With this unit, code A and B cannot be used.

1Set the remote control selection switch on the left side of the remote control to the appropriate position with a pen tip or other pointed instrument .

!If you select AVH mode, there is no need to take the following procedure.

!If you select A/B and if in case you need to operate other Pioneer units (may be avail- able in the future), take the following proce- dure and change the code type to the appropriate type.

2 Press 0 and CLEAR on the remote con-	Other
trol simultaneously to change the code
type.
Initially, the code type is set to A. Each time	Functions
you press 0 and CLEAR simultaneously on the
remote control the code type switches be-
tween A and B.

Using the preprogrammed function

You can operate the preprogrammed functions for each source by using PGM.

!In order to use PGM button for prepro- grammed function, the remote control op- eration mode switch should be set to AVH.

%Press PGM to turn pause on when se- lecting the following sources:

!DVD-V – Built-in DVD player

!M-CD – Multi-CD player

!iPod – iPod

!BT Audio – Bluetooth Audio

En 115