Before You Start
Mark Meaning
Section
02
2 Press RESET with a pen tip or other pointed instrument.
2
Indicates the number of audio sys- tems.
Before
2Indicates the number of subtitle lan-
guages.
Indicates the number of viewing an-
3 | gles. |
|
|
|
|
| Indicates the picture size (aspect ratio: |
| 16 : 9 |
| LB | |
|
| screen | ||
|
|
|
| |
|
|
|
| |
|
|
|
|
|
1 |
|
| Indicates the number of the region | |
|
|
|
| |
| ALL |
| where playback is possible. | |
|
|
|
|
|
When an operation is prohibited
When you are watching a DVD and attempt to perform an operation, it may not be performed because of the programming on the disc.
When this happens, the icon 
appears on the screen.
!The icon 
may not appear with certain discs. 
You Start
RESET button
Notes
!When using with navigation unit or AVG- VDP1, if you press RESET, be sure ACC OFF is selected. If ACC ON is selected, correct opera- tion may not be possible even if you press
RESET.
!After completing connections or when you want to erase all memorized settings or return the unit to its initial (factory) settings, switch
your engine ON or set the ignition switch to ACC ON before pressing RESET.
Resetting the microprocessor
Pressing RESET lets you reset the micropro- cessor to its initial settings.
The microprocessor must be reset under the following conditions:
!Prior to using this unit for the first time after installation
!If the unit fails to operate properly
!When strange or incorrect messages ap- pear on the display
1 Turn the ignition switch OFF.
About the demo mode
Important
The red lead (ACC) of this unit should be con- nected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.
En 
13
