Section
23 
Initial Setup
!Only when Bluetooth adapter (e.g. CD- BTB100) is connected to this unit, you can operate this function.
1Touch PIN code input on the initial menu.
PIN code input display appears.
2Touch
# Touch C to delete the number.
3After inputting PIN code (up to 16 di- gits), touch ENTER.
The PIN code you entered is stored in this unit. 
Extending the vehicle’s antenna
At the standard setting, the antenna of your vehicle is automatically retracted when you se- lect the source OFF or when the ignition switch is at ACC. At this setting, the source re- mains OFF even when you receive an incom- ing call through Bluetooth adapter (e.g. CD- BTB100). If you want to take the incoming calls you receive on the OFF source, turn AUTO ANT MODE off. The OFF source will be switched to Telephone and the antenna of your vehicle will be extended when this unit re- ceives an incoming call.
!Only when Bluetooth adapter (e.g. CD- BTB100) is connected to this unit, you can operate this function.
%Touch AUTO ANT MODE on the initial menu to turn the auto antenna mode off. The vehicle’s antenna will be extended and the source will be switched to Telephone every time you receive an incoming call.
# To turn the auto antenna mode on, touch AUTO ANT MODE again. 
