Additional Information
Troubleshooting
Common
Symptom | Cause | Action (See) |
Power doesn’t turn on. | Leads and connectors are incor- | Confirm once more that all connections are |
The unit doesn’t operate. | rectly connected. | correct. |
| The fuse is blown. | Rectify the reason for the fuse blowing, then |
|
| replace the fuse. Be very sure to install the |
|
| correct fuse with the same rating. |
| Noise and other factors are causing | Press RESET. (Page 13) |
| the |
|
| ate incorrectly. |
|
Playback is not possible. | The disc is dirty. | Clean disc. (Page 121) |
| The loaded disc is a type this unit | Check what type the disc is. |
| cannot play. |
|
Appendix
Additional Information
| Non compatible video system disc | Change to a disc compatible to your video | |
| is loaded. | system. | |
|
|
| |
No sounds are heard. | Cables are not connected correctly. | Connect the cables correctly. | |
The volume level will not rise. |
|
| |
The unit is performing still, slow mo- | There is no sound during still, slow motion or | ||
| |||
| tion or | ||
|
|
| |
There is no picture. | The parking brake cord is not con- | Connect a parking brake cord, and apply the | |
| nected. | parking brake. | |
|
|
| |
| The parking brake is not applied. | Connect a parking brake cord, and apply the | |
|
| parking brake. |
The icon 
is displayed, and op- eration is not possible.
The operation is prohibited for the | This operation is not possible. |
disc. |
|
The operation is not compatible with the disc’s organization.
This operation is not possible.
The picture stops (pauses) and | Reading of data has become impos- | After pressing g once, start playback once | |
the unit cannot be operated. | sible during playback. | more. | |
|
|
| |
There is no sound. | The volume level is low. | Adjust the volume level. | |
Volume level is low. |
|
| |
The attenuator is on. | Turn the attenuator off. | ||
| |||
|
|
| |
There is audio and video skip- | The unit is not firmly secured. | Secure the unit firmly. | |
ping. |
|
| |
|
|
| |
The picture is stretched, the as- | The aspect setting is incorrect for | Select the appropriate setting for your display. | |
pect is incorrect. | the display. | (Page 105) |
When the ignition switch is turned ON (or turned to ACC), the motor sounds.
The unit is confirming whether a disc is loaded or not.
This is a normal operation.
Nothing is displayed.
The touch panel keys cannot be used.
The rear view camera is not con- nected.
B.CAMERA is at incorrect setting.
Connect a rear view camera.
Press V.ADJ to return to the source display and then select the correct setting for B.CAMERA. (Page 101)
En 117
