Section
20 
Digital Signal Processor
Using the equalizer
The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:
Display | Equalizer curve |
|
|
Powerful | Powerful |
|
|
Natural | Natural |
|
|
Vocal | Vocal |
|
|
Flat | Flat |
|
|
Custom1 | Custom 1 |
|
|
Custom2 | Custom 2 |
|
|
Super Bass | Super bass |
|
|
!Custom1 and Custom2 are adjusted equal- izer curves.
!When Flat is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.
%On the normal display, touch EQ to se- lect the equalizer.
Touch EQ repeatedly to switch between the fol- lowing equalizers:
# If SFC instead of EQ appears on the normal display, touch SFC and hold to switch to equalizer function. About SFC, refer to Using the sound field control on this page.
Using the sound field control
The SFC function creates the sensation of a live performance.
!One of the greatest advantages to hear music in live is the original acoustic sound that is echoed or reflected against the stage surroundings. The SFC circuitry en- ables to reproduce the live performing sound in car environment by programming the direct sound, early reflections, and late reflections effects and characterizing the sound from CD, DVD or other medium so it becomes closer to the live acoustic sound.
1On the normal display, touch EQ and hold to switch to SFC function.
Touch EQ and hold until Sound Field Control appears in the display.
# To switch to equalizer function, touch EQ and hold again.
2Touch SFC to select the desired SFC mode.
Touch SFC repeatedly to switch between the following modes:
MUSICAL
Note
If the source is a
96
En
