Section
06 
Tuner
Listening to the radio
1 2 3 | 4 | 5 6 7 |
8
These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page.
1Source name
Shows the selected source name.
2Source icon
Shows which source has been selected.
3Band indicator
Shows which band the radio is tuned to, AM or FM.
4Preset number indicator
Shows which preset has been selected.
5STEREO indicator
Shows when the selected frequency is being broadcast in stereo.
6LOCAL indicator
Shows when local seek tuning is on.
7Frequency indicator
Shows the frequency to which the tuner is tuned.
8Preset list display Shows the preset list.
1Touch the source icon and then touch TUNER to select the tuner.
2Touch the screen to display the touch panel keys.
3Touch BAND to select a band.
Touch BAND repeatedly until the desired band is displayed, FM1, FM2, FM3 for FM or AM.
4To select a preset channel, touch a pre- set channel on the list or touch aor b (P.CH).
The preset channel you selected is tuned in.
# Touching LIST switches between the preset channel list display and the a/b(P.CH) display. Either way, the channels that can be selected are the same.
5To perform manual tuning, briefly touch c or d.
The frequencies move up or down step by step.
# You can also perform manual tuning by mov- ing the joystick on the remote control left or right.
6To perform seek tuning, keep touching c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
# You can cancel seek tuning by briefly touching either cor d.
# If you keep touching cor dyou can skip sta- tions. Seek tuning starts as soon as you release the key.
# You can also perform seek tuning by holding the joystick on the remote control left or right.
Note
If you do not use the touch panel keys within 30 seconds, they will be hidden automatically. 
26
En
