Pioneer AVH-P6800DVD operation manual Correcting distorted sound, Changing languages for

Initial Setup

Mixing AVG-VDP1 beep and audio sound

When connecting the AVG-VDP1 to this unit, a beep sound is occasionally outputted from the AVG-VDP1. To ensure the quality audio sound from this unit, set this function to GUIDE to properly mix the beep sound and the audio sound.

!You can operate this function only when a Pioneer Vehicle Dynamics Processor (AVG- VDP1) is connected to this unit.

!When the multi-channel processor (e.g., DEQ-P8000) is connected to this unit, you cannot use this function.

!We recommend that you select GUIDE to ensure quality sound.

%Touch NAVI MIX on the initial menu to switch the mixing of AVG-VDP1 beep. Touching NAVI MIX switches the mixing set- tings between ALL (mixing all the time) and

GUIDE (mixing when a beep sound is out- putted).

Correcting distorted sound

You can minimize distortion that may be caused by the equalizer curve settings. Setting an equalizer level high can cause dis- tortion. If high sound is crippled or distorted, try switching to LOW. Normally, leave the set- ting at HIGH to ensure quality sound.

!Only when the multi-channel processor (e.g., DEQ-P8000) is connected to this unit, you can operate this function.

%Touch D. ATT on the initial menu to switch the digital attenuator setting. Touching D. ATT switches the digital attenua-

tor settings in the following order:

HIGH—LOW

Section

23

Changing languages for

CAUTION

Some operations on this unit are prohibited while driving or needs to be paid a careful at- tention when operating. In such case, a cau- tion appears on the display. You can change the language of the cautions at this setting.

%Touch CAUTION on the initial menu to select your desired language.

Each time you touch CAUTION, the language for CAUTION is switched.

Resetting the audio functions

You can reset all audio functions except vo-
lume.	Initial
(e.g., DEQ-P8000) is connected to this unit,
! Only when the multi-channel processor
you can operate this function.	Setup
1 Touch RESET on the initial menu.
Proceed with reset? appears and asks you to
confirm it.
2 Touch RESET again to reset audio func-
tions.
Reset completed is displayed and the audio
settings are reset.
# To cancel resetting the audio functions, touch
CANCEL.

Entering PIN code for Bluetooth wireless connection

With some Bluetooth audio players, you may be required to enter to this unit in advance PIN code of your Bluetooth audio player, in order to set this unit ready for a connection from your Bluetooth audio player.

En 109