Section
13XM tuner (GEX-P910XM)
Switching the XM display
% Touch DISP to switch the XM display. Each time you touch DISP changes the XM display in the following order:
Channel
program
Storing and recalling broadcast stations
If you touch any of the preset tuning keys
%When you find a station that you want to store in memory touch and hold a preset tuning key
The number you have touched will flash in the XM preset number indicator and then remain lit. The selected station has been stored in memory.
The next time you touch the same preset tun- ing key
# When the touch panel keys are not displayed, you can display them by touching the screen.
# When
Notes
!Up to 18 stations, six for each of three XM bands can be stored in memory.
!You can also use aand bto recall stations assigned to preset tuning keys
Switching the XM channel select mode
You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.
%Touch MODE to select the desired chan- nel select mode.
Touch MODE repeatedly to switch between the following channel select modes:
CH NUMBER (channel number select setting)
Selecting a channel in the channel category
1Touch MODE to select the channel cate- gory select mode.
CATEGORY appears on the information bar.
2Touch a or b to select the desired chan- nel category.
3Touch c or d to select the desired chan- nel in the selected channel category.
Selecting a channel directly
Refer to Selecting a channel directly on page
55.
Displaying the Radio ID
Refer to Displaying the Radio ID on page 56.
58 En