Silex technology PRICOM SX-300U user manual Netware Setup

Users Manual SX

Netware Setup

Tab Item

Use NetWare

Protocol

Print Server Name

Frame Type

NetWare

method
Printing	PSERVER

		Explanation	Factory
			Default
Enable/Disable NetWare protocol.
			ENABLE
Specify the print server name for the print server when starting in
PSERVER mode. Because this configuration is used as the			PRxxxxxx
identifier on the network in the NetWare protocol, the print server
name set must be different from other names in the NetWare			(Lower 6 digits
			of Ethernet
environment. It is used as a login name in connecting to the
			address)
NetWare server.
Select the default frame type of the print server. If the set frame
type does not work, it will be changed to a different frame type			802.2
automatically.
Select the primary operation mode (PSERVER mode /
RPRINTER mode) of the print server. If the set mode does not			Print server
work, the print server starts in a different mode.
Send the job via NetWare
	NetWare File	Set the name of the file server primarily
	Server to be	connected to. The print server logs into the
	connected	file server set here when operating in	-
		PSERVER mode. The print server searches
		the file server automatically and logs in if
		the value is blank.
	Login	Set the password that is authenticated
	Password	when the print server logs into the file server
Setup		as a PSERVER mode. When the password
		is set for the print server, the same
Bindery		password must be set to the corresponding	-
		file server. If the print server is connected to
		two or more file servers, the same password
		must be set to all the file servers.
	Job Polling	Set the interval for the print server to query
	Interval	the file server for jobs in units of seconds.
		Usually the value should be the default.	4

Appendix 9