Silex technology PRICOM SX-300U user manual Tcp/Ip

Users Manual SX

Tab

Advanced Setup

DNS Server

TCP/IP

WINS Server

Access control

Item	Explanation	Factory
		Default
Use NetworkPnP	Enable/ Disable NetworkPnP function. NetworkPnP
	function enables automatic discovery of printer in	ENABLE
	Windows environments which UPnP.
Use Rendezvous	Enable/ Disable Rendezvous function. Rendezvous
	enables automatic discovery of printer in a MacOS	ENABLE
	X environment.
Rendezvous Name	Specify a Rendezvous name.	RDVxxxxxx
		(Lower 6 digits of
Primary Server	Setting the DNS server (primary) address. When	Ethernet address)
	POP/SMTP server name is configured with at IP	0.0.0.0
	address, the DNS server's setting is not necessary.
Secondary Server	Setting the DNS server (secondary) address. When
	POP/SMTP server name is configured with an IP
	address, the DNS server's setting is not necessary.	0.0.0.0
	The value must be 4 numbers, each between 0-255
	(eg. 192.168.100.10).
Primary Server	Setting the WINS server (primary) address. WINS
	server will resolve the IP address from the host
	name. Therefore you can use a hostname instead	0.0.0.0
	of the IP address when printing. The values must
	be 4 numbers, each between 0-255 (eg.
	192.168.100.10).
Secondary Server	Setting the WINS server (secondary) address.
	WINS server will resolve the IP address from the
	host name. Therefore you can use a hostname	0.0.0.0
	instead of the IP address when printing. The values
	must be 4 numbers, each between 0-255 (eg.
	192.168.100.10).
Scope ID	The scoop ID defines the computer group that
	recognized the registered host name.	-
Set IP filter	Setting of IP filter operations. Available options are
	"allow" and "deny". If you select "allow", only the
	data from the set IP address range are accepted. If	DENY
	you select "deny", the data from the set IP address
	range can not be received.
IP Address range	Setting IP filter range. IP addresses to be filtered
	can be set to maximum 4 address ranges. If	0.0.0.0
	address range setting is not required, please enter
	the address range of "0.0.0.0" to "0.0.0.0".

Appendix 8