Users Manual SX
Using Print Queue Creation Tool of Red Hat Linux
TIP | Note that some steps may vary depending on Red Hat Linux version. |
|
Example: IP address “192.168.10.100” and Host name “pbox” are registered to etc/hosts file and print queue is to be registered by the name “pboxlp”.
1.Select Main menu, then Programs, then System, then Setting printer.
2.Click New in the [printconf.gui] screen.
3.Click Name and alias, then type pboxlp in Printer name, then click Add.
4.Type pboxlp in Alias, then click OK.
5.Click Printer type, then select LPD. Type pbox in the server and lp in the printer.
6.Select Printer driver and Printer option that correspond with your operating environment.
7.After configuration is complete, click OK in [Printer edit].
8.Verify that the printer created is displayed and selected in the [printconf.gui]. Click Apply.
9.Verify the dialog message, “lpd has been successfully rebooted”, then Click OK.
10.Click Test in [printconf.gui] screen. When you get test page, the configuration is complete.
|
|
Using PRICOM in UNIX/Linux Environment |
