Marantz SR8002, SR7002 manual Multi Room Setup, DC Trigger Setup

5-1 MULTI ROOM SETUP

The SR8002 has source selectors, sleep timers and multispeaker output remote controller for the two other rooms in the multi room system. (The SR7002 has only one other room in the multi-room system.)

These features can be set from this menu.

1. Select “5. PREFERENCE” from the MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.

2. Select “MULTI ROOM SETUP” with the 3 or 4 cursor buttons and select either “Room A” or “Room B” with the 1 or 2 cursor buttons.

3. Press the OK/ENTER button to enter the setting.

The following explanation shows how to operate MULTI ROOM A of the multi-room system.

The MULTI ROOM B setting does not have the

VIDEO FUNCTION.

(The SR7002 does not have a MULTI ROOM B setting)

MULTI ROOM SETUP A

VIDEO	: DVD
AUDIO	:DVD
SLEEP	:OFF

MONO/ST:STEREO
OSD INFO:ENABLE
MULT:OFF	MSPK:
VOL :VARI	VOL	:
LEV : - 90dB	LEV	:
RETURN BACK		EXIT

4. Select the desired item with the 3 or 4 cursor button.

VIDEO:

Select the video source of the multiroom output with the 1 or 2 cursor buttons.

AUDIO:

Select the audio source of the multiroom output with the 1 or 2 cursor buttons.

SLEEP:

The sleep mode is available when the multiroom is active, set the time with 1 or 2 cursor buttons. The sleep timer can be set to a maximum 90 minutes in 10 minute increments.

MONO/ST:

This mode switches audio output to the multi room system between MONAURAL and STEREO, using the 1 and 2 cursor buttons.

OSD INFO:

With this function, on-screen display information is shown on connected TVs or other devices when you switch input functions. Select “ENABLE” with the 1 or 2 cursor buttons to enable OSD INFO or “DISABLE” to disable it. Select “DISABLE” if this function is not needed.

MULTI (MULTI ROOM):

Switch the multiroom output “ON” or “OFF” with the 1 or 2 cursor buttons.

MSPK (MULTI SPEAKER):

Switch the speaker output “ON” or “OFF” with the 1 or 2 cursor buttons.

VOL (VOLUME SETUP):

Select whether the multiroom or multi speaker output level is variable or fi xed with the 1 or 2 cursor buttons.

LEVEL (VOLUME LEVEL):

Adjust the multiroom output level with the 1 or 2 cursor buttons. The volume can be set between -90 dB and 0 dB in 1 dB increments.

Note:

•This setting can be changed when the SURR B is set to “NONE” in the SPEAKER SIZE menu and “SPEAKER C” is in the OFF position on the rear panel. When this setting is unavailable, “***” is displayed.

•If “VOLUME” is set to “FIXED”, the multiroom output level cannot be adjusted from the A or B room.

•MSPK cannot be on for both Room A and Room B at

the same time. After you complete this portion of the setup, move the cursor to “RETURN” with the 3 or 4 cursor buttons and press the OK/ENTER button.

5-2 DC TRIGGER SETUP

This unit has 2 DC trigger control jacks, which can be used to link with input functions for the main room or multiroom.

Each trigger can be setup separately.

1. Select “5. PREFERENCE” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.

2. Select “DC TRIGGER SETUP 1or 2” with the

3, 4, 1 and 2 cursor buttons.

3. Press the OK/ENTER button to enter the selection.

DC TRIGGER SETUP

DC TRIG - 1: DISABLE

TV : TAPE :

DVD : CD/R :

VCR1 : AUX2 :

DSS : TUNER :

AUX1 : 7 . 1CH :

RETURN NEXT EXIT

4. You can select “MAIN ROOM”, “MULTI ROOM A”, “MULTI ROOM B”, “REMOTE” or “DISABLE” with the 1 or 2 cursor buttons.

(The SR7002 does not have a MULTI ROOM B setting)

Note:

•REMOTE is available for the external control. The RC8001SR cannot operate the function.

5.Select desired input source with the 3 or 4 cursor buttons.

6.Set to “ON” or “OFF” with the 1 or 2 cursor buttons.

7.After you complete this portion of the setup, move the cursor to “RETURN” with the 3 or 4 cursor button and press the OK/ENTER button.

Note:

•When an input source that is on in the set room is selected, voltage is output to the DC TRIGGER output terminal.

ENGLISH

55