2 SPKR (SPEAKER) SETUP
After you have installed the unit connected all the components and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout.
Before you perform the following settings, it is important that you first determine the following characteristics:
☞P. 46
2 . SPKR SETUP
AUTO SETUP
MANUAL SETUP
THX AUDIO SETUP
RETURN | EXIT |
☞ P. 49
☞P. 56
ENGLISH
• AUTO SETUP:
• MANUAL SETUP:
• THX AUDIO SETUP:
AUTO SETUP
AUTO SETUP: START
MAIN ROOM
SURR BACK: 2CH
RETURNEXIT
AUTO SETUP
NOW ANALYZING!!
CANCEL
| SPEAKER | SIZE |
THX | SPKR | : NO |
SUB | W | : YES |
FRONT | : SMALL | |
CENTER | : SMALL | |
SURR . | : SMALL | |
SURR . B | : 2CH | |
SURR . B SIZE | : SMALL | |
LPF/HPF | : 80Hz | |
BASS | MIX | : |
RETURN | NEXT EXIT |
THX AUDIO SETUP
ADVANCED SPKR ARRAY SURR . B SPKR
: TOGETHER
RETURN | EXIT |
1. Select “2.SPKR SETUP” from the MAIN MENU with 3 or 4 cursor buttons and press the OK/ ENTER button.
2 . SPKR SETUP
AUTO SETUP
MANUAL SETUP
THX AUDIO SETUP
AUTO SETUP
SPEAKERS CHECK:
CANCEL
AUTO SETUP
______________
NOW CALCULATING!
SPEAKER | DISTANCE |
| ||
UNIT |
| : | ft |
|
FRONT | L | : | 10 . 0 | ft |
CENTER |
| : | 10 . 0 | ft |
FRONT | R | : | 10 . 0 | ft |
SURR . R |
| : | 10 . 0 | ft |
SURR . B | R | : | 10 . 0 | ft |
SURR . B | L | : | 10 . 0 | ft |
SURR . L |
| : | 10 . 0 | ft |
SUB W |
| : | 10 . 0 | ft |
RETURN BACK NEXT EXIT
RETURN | EXIT |
2. Select the desired menu with the 3 or 4 cursor buttons, and press the OK/ENTER button.
AUTO SETUP
SPEAKERS CHECK:OK
2nd MIC POSITION!!
START
CHECK CALCULATE
CHECK RESULT
SPEAKER CONFIG SPEAKER SIZE DISTANCE CHANNEL LEVEL CROSSOVER FREQ
STORE
SPEAKER |
| LEVEL | |
TEST MODE | : | MANUAL | |
FRONT | L | : | 0 . 0dB |
CENTER |
| : | 0 . 0dB |
FRONT | R | : | 0 . 0dB |
SURR . R |
| : | 0 . 0dB |
SURR . B | R | : | 0 . 0dB |
SURR . B | L | : | 0 . 0dB |
SURR . L |
| : | 0 . 0dB |
SUB W |
| : | 0 . 0dB |
Note:
•After you complete this the portion of the setup, press the 3, 4, 1, and 2 cursor button. The cursor will move to “RETURN” and press the OK/ ENTER button to go to the
EXIT
EXIT | RETURN BACK | EXIT |
45