ENGLISH |
| NAME INPUT OF THE PRESET STATION. |
| |
This function allows the name of each preset channel | ||||
| ||||
| to be entered using alphanumeric characters. | |||
| Before name inputting, you need to store preset | |||
| stations with the preset memory operation. | |||
|
|
|
|
4.5. 2. 5. 6.
AV SURROUND RECEIVER SR8002
5. After selecting the first character to be entered, press the MEMORY or ENTER button, or press the MEMO button on the remote controller.
The entry in this column is fixed and the next column starts to flash. Fill the next column the same way.
To move back and forth between the characters, press the 1 / 2 cursor buttons or press CH+ or CH– button on the remote controller.
Note:
• Unused columns should be filled by entering |
blanks. |
6. To save the name, press the MEMORY or |
FOR LISTENING TO HD Radio STATIONS
(SR8002 ONLY)
HD Radio technology brings digital radio to conventional analog AM and FM radio stations, with improved sound quality, better reception, and new data services.
HD Radio technology provides
Text data display incudes station name, song title, artist name, and so on.
When stereo broadcasts are received, the ST indicator is illuminated on the FL display.
When an HD Radio (digital) signal is received, the DIGITAL indicator is illuminated on the FL display.
Note:
In this mode, if the strength of the HD Radio signal is weak, the unit automatically changes to Analog mode to receive the analog signal.
Analog Auto Mode
(when receiving FM broadcasts)
T - M O D E : A N A - A T
In this mode, the unit receives only analog signals
CHVOL
5.
SOURCE
M
4.
ENTER button on the front panel, or press the |
MEMO button on the remote controller for more |
than 2 seconds. |
For more information about HD Radio technology, visit: www.ibiquity.com
and changes to AUTO STEREO mode.
See p.68 for more information on Analog received. (Only analog broadcasts are received.)
OK
LIP.SYNC
PREVMUTE
7 8 9
THX
CLEAR 0 MEMO
5.
2.
5.
6.
LEARN
NAME
MACRO
USEPAGE 1 2 3 4
D1
D2
D3
D4
D5
4.
4.
Instead of using the 3 and 4 cursor buttons | TUNING MODE |
|
|
| ||
or the SCAN+ and SCAN– buttons of the | HD Radio stations transmit analog and digital signals | |||||
remote controller unit to select characters, | ||||||
for broadcast programs. | ||||||
characters can be input from the numeric keys | ||||||
You can change the TUNING mode to the desired | ||||||
of the remote controller. See the below table | ||||||
signal type. | ||||||
for a correspondence between characters and | ||||||
|
|
| M | |||
numeric keys. |
|
|
| D1 | ||
|
|
|
| |||
|
|
|
|
| D2 | |
|
|
|
|
| D3 | |
|
|
|
|
|
Notes:
•In this mode, HD Radio signals cannot be received. (Only analog broadcasts are received.)
•This mode is not available when BAND is set to AM.
Analog Mono Mode
T - M O D E : M O N O
1. Recall the preset number to be inputted name with the method described in “Recalling” a preset station.
2. Press the MEMORY button on the front panel or press the MEMO button on the remote controller for more than 3 seconds.
3. The left most column of the station name indicator flashes, indicating the character entry ready status.
4. When you press the 3 or 4 cursor buttons on the front panel or the SCAN+ or SCAN– buttons on the remote controller (page 4), alphabetic and numeric characters will be displayed in the following order:
A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +
→/ → (Blank) → A UP →
→DOWN
Ten keypad | Press, press again, press again, etc. |
|
|
|
| |
1 | A → B → C → 1 → A |
|
|
| D4 | |
| USEPAGE | 1 | D5 | |||
|
|
|
|
| ||
2 | D → E → F → 2 → D |
|
|
|
| |
3 | G → H → I → 3 → G | SURROUND |
|
|
| |
DIGITAL |
|
|
| |||
AAC |
|
|
| |||
CH |
|
| VOL | |||
4 | J → K → L → 4 → J | TV | DVD | VCR | DSS | |
|
| |||||
5 | M → N → O → 5 → M | TUNER | CD | MD | ||
6 | P → Q → R → 6 → P | TAPE | AUX1 | AUX2 | AMP | |
|
|
|
| |||
7 | S → T → U → 7 → S |
|
| LIGHT |
| |
1 |
|
| 2 | |||
| RC8001SR |
| ||||
|
|
|
| |||
8 | V → W → X → 8 → V |
| Learning Remote Controller |
| ||
|
|
|
| |||
9 | Y → Z → space → 9 → Y | 1. Press the > button on the remote controller to | ||||
0 | – → + → / → 0 | |||||
Note: |
| display Page 2. |
|
|
| |
| 2. Each time the | |||||
On the SR8002, when the unit receives HD Radio | ||||||
the TUNER mode changes and the mode is | ||||||
and RBDS broadcasts, the HD Radio and RBDS text | displayed on the FL display. |
|
|
| ||
data is displayed. Therefore, the preset station names |
|
|
| |||
|
|
|
|
entered with this function are not displayed.
Analog/Digital Auto Mode
T - M O D E : D I G - A T
Use this mode when listening to HD Radio stations. (It is recommended that you normally use this mode.)
AUTO STEREO mode is selected and the AUTO indicator is illuminated on the FL display.
In this mode, the unit receives only analog signals and changes to Monaural mode.
See p.68 for more information on Analog Mono Mode.
Note:
In this mode, HD Radio signals cannot be received. (Only analog broadcasts are received.)
70