4 VIDEO SETUP

Video settings are made as follows.

1. Select “4. VIDEO SETUP” from the MAIN MENU with the 3/4 cursor buttons and press the OK/ENTER button.

4

. VIDEO

SETUP

 

 

 

 

VIDEO CONVERT

TV . AUTO

 

:DISABLE

OSD

INFO

 

:ENABLE

I/P CONVERT

 

:ENABLE

HDMI

OUT

 

:OUTPUT1

COMPO

OUT2

 

:MAIN

RETURN

NEXT EXIT

2. Select the desired menu with the 3/4 cursor buttons and press the OK/ENTER button.

•VIDEO CONVERT “4-1 VIDEO CONVERT”

•TV-AUTO

Select the TV AUTO ON/OFF function to enable or disable with the 1 or 2 cursor buttons. (refer to page 66)

•OSD INFO

Select the OSD information function to “ENABLE” or “DISABLE” with the 1 or 2 cursor buttons.

If you select “ENABLE”, this unit will display the status of the feature (Volume up/down, input select, etc..) on the monitor. If you do not desire this information, select “DISABLE”.

Note:

•OSD information is not output to Monitor Output of HDMI and Component Video. However, OSD information is output if the Video Convert function is used to output Video or S-Video video signals to Monitor Out of HDMI and Component Video.

For details, refer to“VIDEO CONVERT”on page 59.

•IP CONVERT

Select the IP CONVERT ON/OFF function to enable or disable with the 1 or 2 cursor buttons. (refer to page 59)

•HDMI OUT

This setting is for selecting which output terminal,

HDMI 1 or HDMI 2, to output the signal to. Select the output destination with the 1 / 2 cursor buttons.

To use the remote controller (RC8001SR) to change the HDMI OUT setting, press the AMP button and then the > button until the second page is displayed. After HDMI 1 or HDMI 2 is displayed on the remote controller, press the D3 or D4 button to switch between them.

M

D1

D2

D3

D4

USEPAGE 2

D5

CH

VOL

TUNER CD

CD-R MD

TAPE

AUX1

AUX2

AMP

 

 

LIGHT

 

1

 

 

2

RC8001SR

Learning Remote Controller

•COMPONENT OUT 2

(This feature is not available on the SR7002.)

This setting is for selecting whether to output the images for the main room or the images for the multi room system to the COMPONENT

MONITOR OUT 2 terminal. Select the output destination between MAIN and MULTI with the 1 / 2 cursor buttons.

Note:

•When MULTI is selected, video signals converted from the MONITOR OUT 2 terminal are not output.

After you complete this portion of the setup, move cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button.

4-1 VIDEO CONVERT

This unit is equipped to convert video signals for monitor output.

This section explains how to set up conversion for each type of video input.

1. Select “4. VIDEO SETUP” from the MAIN MENU with the 3 / 4 cursor buttons and press the OK/ENTER button.

2. Select “VIDEO CONVERT” with the 3 / 4 cursor

buttons and press the OK/ENTER button.

VIDEO CONVERT

TV

:

 

ANA&HDMI

 

DVD

:

 

ANA&HDMI

 

VCR1

:

 

ANA&HDMI

 

DSS

:

 

ANA&HDMI

 

AUX1

:

 

ANA&HDMI

 

TAPE

:

 

ANA&HDMI

 

CD/R

:

 

ANA&HDMI

 

AUX2

:

 

ANA&HDMI

 

RETURN

 

BACK

EXIT

3. Select “FUNCTION” with the 3 / 4 cursor buttons and set the video conversion mode with the 1 / 2 cursor buttons

ANA&HDMI:

This mode both up-converts and down-converts analog video signals (Composite Video, S-Video, Component Video). Furthermore, it up-converts from analog video signal to HDMI. (It cannot down- convert from HDMI digital video signals to analog video signals.)

ANA ONLY:

This mode both up-converts and down-converts analog video signals (Composite Video, S-Video, Component Video). It does not up-convert to HDMI.

OFF:

This mode turns off all conversion features.

Note:

• For details on video convert feature, see page 59.

ENGLISH

53

Page 55 Page 57
Page 56
Image 56
Marantz SR8002, SR7002 manual Video Setup, Video Convert
Page 55 Page 57

SR7002, SR8002 specifications

The Marantz SR8002 and SR7002 are two of the most acclaimed receivers from Marantz, a widely respected name in the high-fidelity audio and home theater industry. These models embody a blend of advanced technology, exceptional sound quality, and aesthetic design, making them ideal for audiophiles and home theater enthusiasts alike.

The SR8002 stands out with its impressive 7.1 channel configuration and powerful amplification capabilities. It uses a unique current feedback amplifier design, which ensures a wider frequency response and lower distortion, delivering a more dynamic soundstage. The receiver offers 130 watts per channel, guaranteeing ample power for driving even the most demanding speakers. Support for various audio formats such as Dolby TrueHD and DTS-HD Master Audio further enhances the listening experience, providing immersive sound particularly suitable for high-definition movie playback.

In terms of connectivity, the SR8002 is equipped with an extensive array of inputs and outputs, including seven HDMI inputs which support 1080p and 4K resolution pass-through. This makes it compatible with an extensive range of devices, from gaming consoles to Blu-ray players. Users can also enjoy video upscaling through the built-in Faroudja DCDi Cinema technology, which ensures that lower resolution sources are enhanced for a more detailed viewing experience.

On the other hand, the SR7002, while slightly older, is not to be overlooked. It features a 7.1 channel setup as well, but with 125 watts per channel, ensuring it still delivers superb performance. The SR7002 is particularly recognized for its high-quality Dolby Digital EX, DTS-ES, and other multi-channel audio formats, which enhances the listening experience. The sloped front panel design and the high-grade components used contribute significantly to its durable build and sonic performance.

Both models include features like Zone 2 and Zone 3 outputs for multi-room audio setups, allowing users to enjoy different audio sources in different rooms simultaneously. The inclusion of Audyssey MultEQ technology in both receivers automates speaker calibration, optimizing the sound field according to the room's acoustics for a more balanced audio experience.

Aesthetically, both receivers have a classic Marantz look with sleek lines and a distinctive gold and black front panel design, which could seamlessly blend into any home entertainment setup. The combination of their advanced technologies, robust build quality, and user-friendly interface ensure that both the SR8002 and SR7002 maintain their status as favorites among home theater aficionados and those who appreciate high-fidelity audio.
Top Page Image Contents