BASIC OPERATION |
SELECTING THE SURROUND MODE
NIGHT MODE | ADJUSTING THE MAIN VOLUME |
ENGLISH | (PLAY BACK) | |
SELECTING AN INPUT SOURCE | ||
|
Before you can listen to any input media, you must first select the input source on the unit.
Example : DVD
Example: AUTO SURROUND
M
D1
D2
LEARN |
|
NAME | D3 |
| |
| D4 |
USEPAGE 1 2 3 4 | D5 |
| |
AV SURROUND RECEIVER SR8002 |
|
Useful at night or when loud noise is undesirable, |
|
this mode compresses the dynamic range, making |
|
it easier to hear quieter audio content without | SURROUND |
increasing the overall volume. | DIGITAL |
AAC | |
Note that the effect of night mode is determined |
|
by the Dolby Digital content. Night mode may have |
|
no effect with content that does not support this |
|
function. |
|
CHVOL
OK
LIP.SYNC
PREVMUTE
GUIDE
MENUEXIT
TEST | CH.SEL | SURR |
AV SURROUND RECEIVER SR8002
TV DVD VCR DSS
TUNER | CD | MD | |
TAPE | AUX1 | AUX2 | AMP |
|
| LIGHT |
|
1 |
|
| 2 |
RC8001SR
Learning Remote Controller
To select DVD, turn the INPUT SELECTOR knob on the front panel or press the DVD button on the remote controller two times in a row. After you have selected DVD, simply turn on the DVD player and play the DVD.
• | As the input source is changed, the new input |
| name will appear momentarily an OSD information |
| on the video display. The input name will also |
| appear in the display, on the |
• | If you use the FUNCTION RENAME feature (see |
| page 44) , the renamed name appears on the |
| display. |
• As the input is changed, this unit will automatically |
CH |
|
| VOL |
7.1CH |
| ATT | |
4 |
| 5 | 6 |
DISP |
| OSD | SLEEP |
7 |
| 8 | 9 |
CLEAR |
| 0 | MEMO |
TUNER | CD | MD | |
TAPE | AUX1 | AUX2 | AMP |
|
| LIGHT |
|
1 |
|
| 2 |
RC8001SR
Learning Remote Controller
(Using the unit)To select the Auto surround mode during playback, press the AUTO button on the front panel.
(Using the remote controller)To select the Auto surround mode, press the AMP button and press the > button until PAGE1 is displayed. Press the AUTO (D1) button.
• | For surround modes, see “Surround Mode” on |
| page 60. |
• To add the THX mode to the Auto Surround mode, | |
| press either the THX button on the unit or the THX |
| button on the remote controller. |
• | To select a specifi c surround mode, Press the |
|
|
|
|
| M |
| D1 |
| D2 |
LEARN |
|
NAME | D3 |
MACRO |
|
| D4 |
USE | PAGE 1 2 3 4 |
| D5 |
CH |
|
| VOL |
TUNER | CD | MD | |
TAPE | AUX1 | AUX2 | AMP |
|
| LIGHT |
|
1 |
|
| 2 |
RC8001SR
Learning Remote Controller
1. To select this mode, press the AMP button on the remote controller, and then press the > button until PAGE3 is displayed.
2. Each time the NIGHT (D1) button is pressed, the mode changes according to the following options indicated on the front of the unit.
• AUTO Mode
N I G H T A U T O
1 2 3
7.1CH | ATT |
Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOLUME 3 / 4 buttons on the remote controller.
To increase the volume, turn the VOLUME knob clockwise or press VOLUME 3 button on the remote, to decrease the volume, turn counterclockwise or press VOLUME 4 button on the remote controller.
Notes:
•The volume can be adjusted within the range of – ∞ to 18 dB, in steps of 1 dB.
•However, when the channel level is set as described on page 51, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to 18 dB.
(In this case the maximum volume adjustment range is “18 dB - Maximum value of channel level)
switch to the digital input, surround mode, |
attenuation, and night mode status which were |
entered during the configuration process for that |
source. |
• When a video source is selected, the selected |
video signal is output from the MONITOR OUT |
terminal. |
individual surround mode button on page 1.2 on |
the remote controller. |
DIALOGUE NORMALIZATION MESSAGE
Dialogue Normalization (Dial Norm) is a feature of Dolby Digital.
When playing back software which has been encoded in Dolby Digital, sometimes you may see a brief message on the FL display which will read
Dialogue Normalization serves to let you know if the source material has been recorded at a higher or lower level than usual. For example, if you see the following message:
If you do not see a message on the FL display, then no adjustment of the volume control is necessary.
AUTO mode is available when decording Dolby TrueHD signals.
When night mode is activated, “NIGHT” is illuminated on the front of the unit. (See page 9)
↓
•NIGHT Mode ON
N I G H T O N
Setting the Night mode to “ON” compresses the dynamic range in Dolby Digital only.
↓
• NIGHT Mode OFF
N I G H T O F F
Turn off the Night mode.
58