Marantz SR7002 Recording AN Analog Source, Selecting Analog Audio Input or Digital Audio Input

ENGLISH	OTHER FUNCTION
	DISPLAY MODE

AV SURROUND RECEIVER SR8002

		LIP.SYNC
	PREV		MUTE
		GUIDE
SURROUND	MENU		EXIT
DIGITAL
AAC	TEST	CH.SEL	SURR

1 2 3

7.1CH	ATT	SPK-AB
4	5	6
DISP	OSD	SLEEP

7 8 9

THX

CLEAR 0 MEMO

RECORDING AN ANALOG SOURCE

In normal operation, the audio or video source selected for listening through this unit is sent to the record outputs.

This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT, CD/CDR OUT, VCR1 OUT, and DSS/VCR2 OUT in the record mode.

To record the input source signal you are currently watching or listening to

1.

SELECTING ANALOG AUDIO INPUT OR

DIGITAL AUDIO INPUT

	M
	D1
	D2
	D3
	D4
USEPAGE	4
	D5

CH			VOL
TUNER	CD	CD-R	MD
TAPE	AUX1	AUX2	AMP
		LIGHT
1			2

RC8001SR

Learning Remote Controller

LISTENING THROUGH HEADPHONES

This jack may be used to listen to the unit’s output through a pair of headphones. Be certain that the headphones have a standard 1/4” stereo phono plug.

Note that the speakers will automatically be turned off when the headphone jack is in use.

AV SURROUND RECEIVER SR8002

You can select the display mode for the front display of the unit.

To select this mode, press the DISPLAY on the remote controller or the front panel.

When this button is pressed, the display mode is switched in the following sequence.

Input Mode → Surround Mode → Auto display OFF

→Display OFF → Normal Mode → Input Mode

Normal Mode:

Displays the selected input function. If the function has been renamed using the Function Rename feature (see page 44), the renamed name appears on the display.

Input Mode:

Displays the input mode set via the Function Input Setup feature (see page 43).

Surround Mode:

Displays the status of the selected surround mode.

Auto Display Off mode:

The display is off. But, if you make a change to the unit such as the input or surround mode, the display will show that change, then go back to off after about 3 seconds. When changing the volume, it is not displayed.

Display Off mode:

The display is off completely.

Note:

•Only the DISP indicator will be illuminated on the front display in display off condition.

AV SURROUND RECEIVER SR8002

1.	TV	DVD	VCR	DSS
	TUNER	CD	CD-R	MD
	TAPE	AUX1	AUX2	AMP
			LIGHT
	1			2

RC8001SR

Learning Remote Controller

1. Select the input source to record by turning the INPUT FUNCTION SELECTOR knob on the front panel or simply press the input selector buttons on the remote controller.

The input source is now selected and you may watch or listen to it as desired.

2. The currently selected input source signal is output to the TAPE OUT, CD/CDR OUT, VCR1 OUT, and DSS/VCR2 OUT outputs for recording.

3. Start recording to the recording component as desired.

If you have already assigned the digital inputs, you can temporarily select the audio input mode for each input source as following procedures.

Press the AMP button and press the > button until PAGE4 is displayed. Press the A/D (D3) button. When this button is pressed, the input mode is switched in the following sequence.

Auto → HDMI → Digital → Analog → Auto

Auto mode:

The types of signals being input to the digital and analog input jacks for the selected input source are detected automatically.

If no digital signal is being input, the analog input jacks are selected automatically.

HDMI mode:

HDMI mode can be selected only when an HDMI input has been assigned as an input source. When “HDMI AUDIO” under PREFERENCE of the SETUP MENU is set to “THROUGH”, the HDMI mode cannot be selected.

Digital mode:

The input signal is fixed to an assigned digital input terminal.

Analog mode:

The analog input jacks are selected.

This selection is temporary and will not be stored in memory.

To store changes to the input mode, select “1. INPUT SETUP” from the MAIN MENU. (See page 43)

Note:

•When using headphones, the surround mode will change to STEREO and Dolby Headphone by MENU and Cursor button.

•The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack.

64