Example Conﬁrmation screen for speaker detection

9. Checking Measurement Results

When calculations for the measurement results end, a screen appears for confirming the calculation results.

CHECK RESULT

SPEAKER CONFIG

SPEAKER SIZE

DISTANCE

CHANNEL LEVEL

CROSSOVER FREQ

STORE

EXIT

Select items to check with the 3/4 cursor buttons and press the OK/ENTER button to enter them.

Note:

To check equalizer (MultEQ) parameters, see page 57.

[Example] Conﬁrmation screen for speaker detection

SPEAKER		CONFIG
CHECK	!!	SPEAKER
FRONT	: YES
CENTER	: NON
FRONT R	: YES
SURR . R	: YES
SURR . B R : NON
SURR . B L : NON
SURR . L	: YES
SUB W	: YES
RETURN		NEXT

[Example] Conﬁrmation screen for the distance from speakers to the listening position

		DISTANCE
UNIT			:	ft
FRONT	L		:	30 . 00ft
CENTER			:	19 . 33ft
FRONT	R		:	29 . 66ft
SURR . R			:	21 . 50ft
SURR . B		R	:	12 . 33ft
SURR . B		L	:	11 . 66ft
SURR . L			:	16 . 33ft
SUB W			:	12 . 50ft
RETURN				NEXT

*The units can be changed by moving the cursor to [ft] of UNIT and pressing 1 / 2 the cursor buttons. Each time a 1 / 2 cursor button is pressed, the units alternate between [ft] (feet) and [m] (meters).

[Example] Conﬁrmation screen for speaker size and crossover frequency

SPEAKER			SIZE
FRONT	L		: AUTO
CENTER			: AUTO
FRONT	R		: AUTO
SURR . R			: AUTO
SURR . B		R	: AUTO
SURR . B		L	: AUTO
SURR . L			: AUTO
RETURN			NEXT
CROSSOVER FREQ
FRONT		: AUTO
CENTER		: AUTO
SURR		: AUTO
SURR . B		: AUTO

RETURN

*AUTO is displayed to indicate that the speaker size and crossover frequency results were automatically measured.

10. Storing Measurement Results in Memory

Once finished confirming the measurement results, select “RETURN” with the 3/4 cursor buttons and press the OK/ENTER button to display the CHECK RESULT screen.

CHANNEL			LEVEL
FRONT	L	:	0	. 0dB
CENTER		: - 6 . 5dB
FRONT	R	: - 1 . 5dB
SURR . R		:	+1	. 0dB
SURR . B	R	:	+9	. 5dB
SURR . B	L	:	+12	. 0dB
SURR . L		: - 2 . 5dB
SUB W		: - 12 . 5dB
RETURN			NEXT EXIT

CHECK RESULT

SPEAKER CONFIG

SPEAKER SIZE

DISTANCE

CHANNEL LEVEL

CROSSOVER FREQ

STORE

EXIT

Place the cursor on “STORE” and press the OK/ENTER button to store all parameters including the equalizer parameters in memory. If not wanting to store the calculation results in memory, place the cursor on “EXIT” and press

the OK/ENTER button.

Note:

Pressing “EXIT” prior to pressing “STORE” erases all measurement results and calculation results, therefore operate the remote controller with care.

When storing operations end, the following OSD appears on the display.

2 . SPKR SETUP

AUTO SETUP

MANUAL SETUP

THX AUDIO SETUP

RETURN

EXIT

Notes:

•Do not turn the power to the unit off while storing parameters in memory. This may erase all data in the unit’s memory and may damage the unit.

•Please set any THX Certiﬁed speakers manually to “Small” and the crossover “80 Hz” after Auto setup operation.

ENGLISH

SR7002, SR8002 specifications

The Marantz SR8002 and SR7002 are two of the most acclaimed receivers from Marantz, a widely respected name in the high-fidelity audio and home theater industry. These models embody a blend of advanced technology, exceptional sound quality, and aesthetic design, making them ideal for audiophiles and home theater enthusiasts alike.

The SR8002 stands out with its impressive 7.1 channel configuration and powerful amplification capabilities. It uses a unique current feedback amplifier design, which ensures a wider frequency response and lower distortion, delivering a more dynamic soundstage. The receiver offers 130 watts per channel, guaranteeing ample power for driving even the most demanding speakers. Support for various audio formats such as Dolby TrueHD and DTS-HD Master Audio further enhances the listening experience, providing immersive sound particularly suitable for high-definition movie playback.

In terms of connectivity, the SR8002 is equipped with an extensive array of inputs and outputs, including seven HDMI inputs which support 1080p and 4K resolution pass-through. This makes it compatible with an extensive range of devices, from gaming consoles to Blu-ray players. Users can also enjoy video upscaling through the built-in Faroudja DCDi Cinema technology, which ensures that lower resolution sources are enhanced for a more detailed viewing experience.

On the other hand, the SR7002, while slightly older, is not to be overlooked. It features a 7.1 channel setup as well, but with 125 watts per channel, ensuring it still delivers superb performance. The SR7002 is particularly recognized for its high-quality Dolby Digital EX, DTS-ES, and other multi-channel audio formats, which enhances the listening experience. The sloped front panel design and the high-grade components used contribute significantly to its durable build and sonic performance.

Both models include features like Zone 2 and Zone 3 outputs for multi-room audio setups, allowing users to enjoy different audio sources in different rooms simultaneously. The inclusion of Audyssey MultEQ technology in both receivers automates speaker calibration, optimizing the sound field according to the room's acoustics for a more balanced audio experience.

Aesthetically, both receivers have a classic Marantz look with sleek lines and a distinctive gold and black front panel design, which could seamlessly blend into any home entertainment setup. The combination of their advanced technologies, robust build quality, and user-friendly interface ensure that both the SR8002 and SR7002 maintain their status as favorites among home theater aficionados and those who appreciate high-fidelity audio.

Marantz SR8002, SR7002 manual Example Conﬁrmation screen for speaker detection, OK/ENTER button

Models: SR7002 SR8002

[Example] Conﬁrmation screen for speaker detection

the OK/ENTER button.

ENGLISH

SR7002, SR8002 specifications