RECALLING A PRESET STATION
TV | DVD | VCR | DSS |
| CH | VOL |
|
|
| ||||
TUNER | CD | MD | 1. | 2. |
| |
TAPE | LIGHT | AUX2 | AMP |
| ||
AUX1 |
|
| OK | |||
|
|
|
|
|
| |
1 |
|
| 2 |
|
|
|
| RC8001SR |
|
|
|
|
|
| Learning Remote Controller |
|
|
|
|
LIP.SYNC
PREVMUTE
GUIDE
(Using the unit)
4. You can fast forward the preset stations, press the CH+ continuously.
5. When the desired preset station is received, cancel the preset scan operation by pressing the CLEAR button or
PRESET CHANNEL LIST DISPLAY
4. Up to 10 channels can be displayed at a time. If there are more than 10 channels, press P- INFO (D5) on the remote controller once more to display the next page.
The list display will disappear automatically in 5 seconds.
SORTING PRESET STATIONS
AV SURROUND RECEIVER SR8002
SURROUND |
DIGITAL |
AAC |
ENGLISH
1. Select the desired preset station by pressing the 1 or 2 cursor buttons on the front panel.
A complete list of the broadcast channels stored in this unit can be displayed.
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory using the following procedure.
(Using the remote controller)
1. Press the TUNER button twice within two seconds on the remote.
2. Press the CH+ or CH– button to tune in the deseired preset station.
Or enter the preset station number with the numeric buttons.
PRESET SCAN
|
|
|
|
|
| M |
|
|
|
|
|
|
| D1 |
|
TV | DVD | VCR | DSS |
|
|
| 2. |
|
|
|
|
|
| D2 | |
TUNER | CD | MD | 1. | LEARN |
| ||
|
|
|
| NAME | D3 | ||
TAPE | AUX1 LIGHT AUX2 | AMP | MACRO | D4 | 4. | ||
1 |
|
| 2 |
| USE | PAGE 1 2 3 4 | 2. |
|
|
|
|
| |||
|
| RC8001SR |
|
|
| D5 |
|
|
|
|
|
|
|
| |
| Learning Remote Controller |
|
|
|
|
|
1. Press the Tuner button on the remote controller twice within two seconds to switch to the TUNER function.
2.
SURROUND
DIGITAL
AAC
3.
TEST | CH.SEL | SURR |
1 | 2 | 3 |
7.1CH | ATT | |
4 | 5 | 6 |
DISP | OSD | SLEEP |
7 | 8 | 9 |
| THX |
|
CLEAR | 0 | MEMO |
TV DVD VCR DSS
If you have stations memorized, and there is a gap in the sequential order:
I.e. the stations are stored as follows
1)87.1 MHz
2)93.1 MHz
3.3) 94.7 MHz
10)105.9 MHz
2. | (notice there is no stations programmed for pre sets |
| for |
To sort the numbers, press and hold the MEMORY and the 4 cursor buttons.
“PRESET SORT” will appear on the display and
M
CHVOL
2. Press > on the remote controller to display
sorting will be done.
LEARN
NAME
MACRO
USEPAGE 1 2 3 4
TUNER CD
TAPE AUX1 AUX2
LIGHT
1
RC8001SR
Learning Remote Controller
D1
D2
D3
D4
D5
MD
AMP
2
2. 4. OK 5.
2. |
|
| LIP.SYNC |
|
|
| PREV |
| MUTE |
|
|
| GUIDE |
|
|
| MENU |
| EXIT |
|
| TEST | CH.SEL | SURR |
1. | 4 | 5 | 6 | 5. |
DISP | THX | SLEEP | ||
| OSD |
| ||
| 7 | 8 | 9 |
|
CLEAR 0 MEMO
PAGE2, then press
3. The list of preset channels will be displayed on the screen of the TV monitor connected to this unit.
PRESET LIST
NO . 1 FM 87 . 10 MHz
NO . 2 FM 93 . 10 MHz
NO . 3 FM 94 . 70 MHz
NO . 10 FM105 . 70 MHz
RETURN | NEXT EXIT |
1. Recall the preset number to be cleared with the method described in “Recalling” a preset station.
2. Press the MEMORY button on the front panel or press the MEMO button on the remote.
3. The stored preset number blinks in the display for 5 seconds. While blinking, press the CLEAR button on the front panel or the remote controller.
4. “xx CLEAR” appears on the display to indicate that the specified preset number has been cleared.
(Using the remote controller)
1. Press the TUNER button twice within two seconds on the remote controller.
2. Press the > button until PAGE2 is displayed and press the
“PRESET SCAN” appears on the front display and then the preset station with the lowest preset number is recalled first.
3. Preset stations are recalled in sequence (No.1
→No.2 → etc.) for 10 seconds each.
On the SR8002, multicast channels are also displayed, as shown below, when an HD Radio channel is set to the preset channels.
PRESET LIST
NO . 1 FM 87 . 10 MHz
NO . 2 FM 93 . 10 MHz
NO . 3 FM 94 . 70 MHz
NO . 4 FM 94 . 70 MHz - 3
NO . 5 FM 94 . 70 MHz - 4
NO . 10 FM105 . 70 MHz
Note:
•To clear all stored preset stations, press and hold the CLEAR and the ENTER buttons for two seconds.
No stored preset number will be skipped.
In the list of preset channels above, preset numbers 4 and 5 are the multicast channels for preset number 3.
69