Sybase 6131765115041SS Starting the PowerBuilder 11.5 setup program, To start the setup program

CHAPTER 1 Installing PowerBuilder Enterprise

Starting the PowerBuilder 11.5 setup program

To install PowerBuilder Enterprise, insert the PowerBuilder DVD into your

DVD drive. The setup program starts automatically.

Installing from a downloaded image

If you have downloaded an installable image from the Sybase Web site, run the autorun.exe file. If you run setup.exe, the procedure described in “Providing basic information” on page 11 starts and you will not be able to install SQL Anywhere.

❖To start the setup program:

1 Exit any programs that are running.

2 Insert the PowerBuilder 11.5 DVD into your DVD-ROM drive.

On the start page of the setup wizard, you can choose to install

PowerBuilder 11.5 and SQL Anywhere 11.0.

3Select SQL Anywhere 11.0 first if it is not already installed.

For how to install SQL Anywhere, see “Installing SQL Anywhere” on page 10.

SQL Anywhere required

If you select PowerBuilder and the setup program detects that SQL Anywhere is not installed on your system, it displays a warning message that allows you to exit the PowerBuilder setup program and return to the start page and select SQL Anywhere. If you choose not to install SQL Anywhere, the features that depend on it, listed in Table 1-3 on page 6, are not installed.

4Select PowerBuilder 11.5.

Selecting PowerBuilder 11.5 starts a common setup program that collects basic information before launching the individual setup programs for PowerBuilder and InfoMaker. You will need to provide license information. For how to proceed, see “Providing basic information” on page 11.

Installation Guide 9