Hotkey Setting Mode (HSM)
Function
1.Press and hold [Num Lock]
2.Press and release
3.Release [Num Lock]
Invoke HSM, then press [h]
Invoke HSM, then press [t]
Invoke HSM, then press [F1] Invoke HSM, then press [F2]
Invoke HSM, then press [F3] Invoke HSM, then press [F5]
Invoke HSM, then press [←]
Invoke HSM, then press [→]
Invoke HSM, then press [b]
Invoke HSM, then press [X*] [Y*] [Enter]
Invoke HSM, then press [r] [Enter]
Invoke HSM, then press [a] [Enter]
or
Invoke HSM, then press [q] [Enter]
Description
Invoking hotkey setting mode
Note: To exit HSM manually, press Esc or spacebar.
Change the HSM invocation keys from [Num Lock] to [Ctrl] and from
Switch port switching hotkey sequence between [Scroll Lock] [Scroll Lock] and [Ctrl] [Ctrl]
Set keyboard operating platform to PC compatible Set keyboard operating platform to Mac compatible
Set keyboard operating platform to Sun compatible
Perform keyboard / Mouse reset on the port that has KVM focus.
Note: You can also press and hold Port 1 and Port 2 front panel push button to perform keyboard / mouse reset.
Invokes Skip mode and skips from the current port to the first accessible port previous to it
Invokes Skip mode and skips from the current port to the next accessible port
Toggle hotkey beepers on or off
Switches KVM focus to the computer that is connected to Port X in the 1st Level and Port Y in the 2nd Level
Note: If you only have a single level installation, simply ignore the Y interval
Restore default settings (Administrator ONLY)
Invoke Auto Scan Mode
Note: Auto Scan can be paused and resume by pressing [p] or by a single
31