Restore Factory Default Settings
This restore will change all settings back to default. This will also have administrator and all user accounts removed from the KVM. All port names and setting will also be removed. In other words, everything will be changed as if it is a brand new unit.
Step 1 Unplug the DC connector from the KVM, then remove the housing of the KVM.
Step 2
Using a jumper cap, short the jumper on the main board labeled J30.
Step 3
Now plug the DC connector back into the DC jack from the KVM. This will restore the KVM with factory default firmware.
Step 4
A message will appear on the monitor as below.
Step 5
Unplug DC connector from the KVM, then remove the jumper and screw the housing back on the KVM.
Final Step
Plug DC connector back into the KVM, then the KVM will be ready for usage again.
37