Factory Default Settings, Firmware Upgrade

Factory Default Settings

Function

OSD Hotkey

Invoking HSM

Auto Scan Duration

Scan-Skip Mode

Screen Blanker

Beeper

Keyboard Operating Platform

Port ID Display Position

Port ID Display Duration

Port ID Display Mode

Accessible Ports

Auto-Logout Time

Default Settings

[Scroll Lock] [Scroll Lock]

[Num Lock] [-]

5seconds All

Off On

PC Compatible Upper left corner

3seconds

Port Number + Port Name

F (Full) For all Users on all ports Disabled

Firmware Upgrade

Note: In order to perform a firmware upgrade, you need to use a computer that’s not connected to the KVM.

Step 1

Connect the provided firmware upgrade cable to the firmware upgrade port of the KVM and the serial port of your computer. Connect power adapter to your power outlet and the KVM.

Step 2

Go to www.iogear.com to download the latest available firmware or the specific firmware that you wish to upgrade to.

Step 3

Please make sure all the computers that are connected to the KVM are completely shutdown. Then Invoke Firmware Upgrade Mode. (Please refer to OSD Operation section)

Step 4

Extract the file with WinRAR or compatible software. Then double click on the execute file to begin with the Firmware Upgrade Utility.