Sybase 15 manual Connect to the network Shut down Replication Server

APPENDIX A SySAM Administration

3 Enter:

./lmutil lmborrow SYBASE enddate [ time ]

where endate [time] is the desired borrow end date.

Note Run lmborrow from the same machine on which licenses are being borrowed, and from the same user that starts Replication Server.

For example, the following command sets the end date at 1 p.m. on August 20th, 2005:

lmutil lmborrow SYBASE 20-aug-2005 13:00

The maximum borrow time is 30 days. Your license administrator can reduce the maximum borrow time following the instructions in “Returning a borrowed license early” on page 49.

4Start Replication Server. The checked out license is borrowed.

5Disconnect from the network.

❖Displaying status on a borrowed license

1Go to $SYBASE/SYSAM-2_0/bin.

2Enter:

./lmutil lmborrow -status

❖Returning a borrowed license early

1 Connect to the network.

2 Shut down Replication Server.

3 Go to $SYBASE/SYSAM-2_0/bin.

4 Return each borrowed license by entering:

./lmutil lmborrow -return [-c licfile] [-d display_name] feature

For example, the following command returns the REP_SERVER license:

./lmutil lmborrow -return -c

$SYBASE/SYSAM-2_0/licenses -d myhost REP_SERVER

❖Renewing a borrowed license

1 Connect to the network.

2 Shut down Replication Server.

Installation Guide for UNIX 49