Linksys EPSX3, PPSX1 manual Appendix F Specifications for the 3-Port PrintServer, Environmental

Page 37

Instant EtherFast® Series

Please be aware that although Linksys provides instructions for the setup of the TCP/IP protocol, these instructions are provided for reference only. Linksys will not provide technical support for the configuration and troubleshooting of the TCP/IP protocol. For full instructions on using TCP/IP, consult your oper- ating system’s documentation.

EtherFast 10/100 PrintServers

Appendix F: Specifications for the 3-Port PrintServer

Model Number

EPSX3 ver. 2

Standards

IEEE 802.3, IEEE 802.3u

Protocol

CSMA/CD

Topology

Star

Ports

Two DMA-Equipped Bi-directional Parallel Ports,

 

One Parallel Printer Port,

 

One Auto-Sensing RJ-45 10/100 Port

Port Speed (Mbps)

10 or 100 (Half Duplex)

 

20 or 200 (Full Duplex)

Memory

512 KB RAM Buffer, 512 KB Flash Memory

Cabling Type

Printer Cabling: IEEE 1284 Standard Printer

 

Cable

 

Network Cabling: UTP Category 5 or Better

LEDs

Power, Link (for LAN),

 

Status and Error (for each Printer)

Button

Reset

 

 

Environmental

 

Dimensions

7.32" x 6.06" x 2.52"

 

(186 mm x 154 mm x 64 mm)

Unit Weight

15.2 oz. (0.43 kg)

Power Input

12V DC, 800 mA

Certifications

FCC Class B, CE Mark

Operating Temp.

32ºF to 104ºF (0ºC to 40ºC)

Storage Temp.

-4ºF to 158ºF (-20ºC to 70ºC)

Operating Humidity

10% to 85%, Non-Condensing

Storage Humidity

5% to 90%, Non-Condensing

66

67

Image 37
Contents EtherFast 10/100 PrintServers Copyright & Trademarks Table of Contents Introduction FeaturesEtherFast 10/100 PrintServers Package Contents for the 1-Port PrintServer Package Contents for the 3-Port PrintServer3-Port PrintServer’s LEDs 1-Port PrintServer’s LEDs 3-Port PrintServer’s PortsFinding the PrintServer’s Default Name Hardware InstallationConnecting The PrintServer to Your Network 1-Port PrintServer’s PortsConnecting the Power Windows Driver SetupInstalling the Windows Drivers Instant EtherFast Series Instant EtherFast Series Starting the Bi-Admin Management Utility Installing the Bi-Admin Management UtilityObtaining Device Information Device Information Icon Using Bi-AdminRefreshing the Device List Refresh Icon Setting the PrintServer’s IP AddressChecking the Status of a Printer Port Printer Status Icons Changing the Device NameResetting the PrintServer Attaching Bi-Admin to a Remote PrintServerRestoring Factory Default Enabling and Disabling ProtocolsAccessing the Web-based Utility Configuring the PrintServer Using the Web- based UtilityServer PrinterStatus TCP/IPAppleTalk Advanced PropertiesNetBEUI Logical PrintersPrint Server Mode Remote Printer ModeNetWare Job Notification The options areGeneral SnmpManagement Stations Trap ReceiversInstalling using IPP CLIENT.EXE Windows IPP Client SetupInternet Printing Protocol IPP Changing the IPP Port Settings Installation is now completeOpen the Printers folder Start = Settings = Printers IPP printer is now ready for use Using IPP Printers IPP Client Setup for Windows 2000 and XPPrint Server Mode and Remote Printer Mode in NetWare NetWare Services SetupPure IP NetWare 5.x Setup Load Ndpsm PMGR.TeSupp Creating an Ndps ManagerCreating NetWare 5.x Ndps Printers Select Ndps PrinterIPX Printing in NetWare 5.x, 4.x Main Printer Manager windowHardware Issues Appendix a TroubleshootingGeneral Printing Issues Print Diagnostic Report NetWare Printing IssuesPrintServer prints garbage NetWare 2.xRemote Printer Mode Status Password MismatchConnecting to Server ConnectedWindows Printing Issues How do I service additional NetWare bindery file servers?Run Pconsole How do I attach to more than one NetWare Print Server?Instant EtherFast Series Appendix B Dhcp Support for the PrintServer Setting Up TCP/IP in WindowsIPX Setup for Windows 95, 98, and Millennium TCP/IP Setup for Windows 95, 98, and MillenniumTCP/IP Setup for Windows NT IPX Setup for Windows NTIPX Setup for Windows TCP/IP Setup for WindowsIPX Setup for Windows XP TCP/IP Setup for Windows XPLPR Port Setup in Windows NT Appendix D Setting Up the LPR Port in Windows NT 4.0Standard TCP/IP Print Port Setup in Windows 2000 and XP About Bi-directional Printing Connecting to Other Switches and HubsAbout the PrintServer’s Software Environmental Appendix F Specifications for the 3-Port PrintServerAppendix H Warranty Information Appendix G Specifications for the 1-Port PrintServerOne DMA-Equipped Bi-directional Printer Ports Appendix I Contact Information Technical Support RMA Issues FaxSales Information Web FTP SiteCopyright 2002 Linksys, All Rights Reserved