Instant EtherFast® Series
The SNMP Page
Figure
Click the SNMP tab to view or change the PrintServer’s SNMP settings.
The Print Server supports SNMP (Simple Network Management Protocol). This allows network supervisors to monitor and control the Print Server using network management platforms such as HP OpenView, IBM SystemView, etc.
The appropriate MIB file must be imported into your SNMP management pro- gram using the
General
SysContact Text Field - Name of the contact person.
SysLocation Text Field - Location of the contact person.
Note: Linksys does not provide technical support for SNMP man- agement.
EtherFast 10/100 PrintServers
Management Stations
Station No. Select the Management station
IP Address Enter the management station’s IP Address, which has the SNMP program installed.
Community This is a text field. Enter the name of the community, normally public or private.
Access Select the desired level of access,
Trap Receivers
Receiver No. Select the Trap Receiver number
IP Address Enter the Trap Receiver’s IP Address, where the Trap message will be sent.
Community This is a text field. Enter the name of the community, normally public or private.
Enable Check to enable; select the severity level. By default, all traps are level one.
If you make any mistakes, click the Cancel button, to exit the screen without making any changes. Once you are certain of any changes you have made, click the Save button to implement the changes.
32 | 33 |