Linksys PPSX1, EPSX3 manual Port PrintServer’s Ports, Port PrintServer’s LEDs

Page 6

Instant EtherFast® Series

The 3-Port PrintServer’s Ports

	Figure 2-2
Power Port	This port on the back of your unit connects your
	Switch’s power adapter.
Printer 1, Printer 2,	These three parallel (LPT) ports connect to your
Printer 3	printers.
LAN Port	This Ethernet RJ-45 port connects to your network
	device, such as a PC, other print server, remote hard
	drive, and any other networkable device. Use UTP
	Category 5 or better cabling with this port.
Reset Button	Briefly pressing the Reset Button will refresh the
	PrintServer’s connections, potentially clearing any
	jammed links. Holding in the Reset button will gen-
	erate a diagnostic print-out.

Reset Button

This button has two functions: to restore the factory default settings and to print a diagnostic test page containing all current settings.

To reset the factory default settings:

1.Turn the PrintServer OFF.

2.Press and hold the Reset button. While pressing the button, switch the Print Server ON.

3.If you continue pressing the button for 10 seconds, a diagnostic page will be printed, showing the new (default) settings.

To generate a diagnostic test printout:

1.Ensure that the PrintServer and the attached Printer are ON.

2.Press the Reset button and hold it in for 2 seconds.

3.The diagnostic test page, containing the current settings, will be printed, unless you have a PostScript printer. PostScript printers are unable to print this page.

EtherFast 10/100 PrintServers

Chapter 3: Getting to Know the EtherFast® 1-Port PrintServer

The 1-Port PrintServer’s LEDs

	Figure 3-1
Power	Green. The Power LED illuminates when the PrintServer is
	powered on.
Act	Green. If the Act LED is continuously illuminated, the
	PrintServer is actively sending or receiving data.
LAN	Green. The LAN LED illuminates to indicate that the
	PrintServer is successfully connected to a device through the
	LAN port.
Error	Red. The Error LED lights up when there is a problem print-
	ing to the indicated printer.

4

5

Image 6

Contents EtherFast 10/100 PrintServers Copyright & Trademarks Table of Contents Features IntroductionEtherFast 10/100 PrintServers Package Contents for the 3-Port PrintServer Package Contents for the 1-Port PrintServer3-Port PrintServer’s LEDs 3-Port PrintServer’s Ports 1-Port PrintServer’s LEDsConnecting The PrintServer to Your Network Hardware InstallationFinding the PrintServer’s Default Name 1-Port PrintServer’s PortsWindows Driver Setup Connecting the PowerInstalling the Windows Drivers Instant EtherFast Series Instant EtherFast Series Installing the Bi-Admin Management Utility Starting the Bi-Admin Management UtilityUsing Bi-Admin Obtaining Device Information Device Information IconChecking the Status of a Printer Port Printer Status Icons Setting the PrintServer’s IP AddressRefreshing the Device List Refresh Icon Changing the Device NameRestoring Factory Default Attaching Bi-Admin to a Remote PrintServerResetting the PrintServer Enabling and Disabling ProtocolsServer Configuring the PrintServer Using the Web- based UtilityAccessing the Web-based Utility PrinterTCP/IP StatusAdvanced Properties AppleTalkLogical Printers NetBEUINetWare Remote Printer ModePrint Server Mode Job Notification The options areManagement Stations SnmpGeneral Trap ReceiversWindows IPP Client Setup Installing using IPP CLIENT.EXEInternet Printing Protocol IPP Installation is now complete Changing the IPP Port SettingsOpen the Printers folder Start = Settings = Printers IPP Client Setup for Windows 2000 and XP IPP printer is now ready for use Using IPP PrintersNetWare Services Setup Print Server Mode and Remote Printer Mode in NetWarePure IP NetWare 5.x Setup Creating NetWare 5.x Ndps Printers Creating an Ndps ManagerLoad Ndpsm PMGR.TeSupp Select Ndps PrinterMain Printer Manager window IPX Printing in NetWare 5.x, 4.xAppendix a Troubleshooting Hardware IssuesGeneral Printing Issues PrintServer prints garbage NetWare Printing IssuesPrint Diagnostic Report NetWare 2.xConnecting to Server Password MismatchRemote Printer Mode Status ConnectedRun Pconsole How do I service additional NetWare bindery file servers?Windows Printing Issues How do I attach to more than one NetWare Print Server?Instant EtherFast Series Setting Up TCP/IP in Windows Appendix B Dhcp Support for the PrintServerTCP/IP Setup for Windows NT TCP/IP Setup for Windows 95, 98, and MillenniumIPX Setup for Windows 95, 98, and Millennium IPX Setup for Windows NTIPX Setup for Windows XP TCP/IP Setup for WindowsIPX Setup for Windows TCP/IP Setup for Windows XPAppendix D Setting Up the LPR Port in Windows NT 4.0 LPR Port Setup in Windows NTStandard TCP/IP Print Port Setup in Windows 2000 and XP Connecting to Other Switches and Hubs About Bi-directional PrintingAbout the PrintServer’s Software Appendix F Specifications for the 3-Port PrintServer EnvironmentalAppendix G Specifications for the 1-Port PrintServer Appendix H Warranty InformationOne DMA-Equipped Bi-directional Printer Ports Sales Information Technical Support RMA Issues FaxAppendix I Contact Information Web FTP SiteCopyright 2002 Linksys, All Rights Reserved