Linksys USB100H1 manual Connecting to an Ethernet or Fast Ethernet Network

Linksys HomeLink™ Series

Connecting to an Ethernet or Fast Ethernet Network

1.Attach one end of an Ethernet cable into the USB Network Adapter’s LAN 10/100 port.

2.Plug the other end of the cable into a Ethernet or Fast Ethernet hub, switch, or router. If you plan to use both 10BaseT and 100Mbps network segments on the same network, you'll need a dual-speed hub or switch that allows segments of different speeds to communicate. For more infor- mation on 10/100 dual-speed hubs and switches, visit the Linksys web site at www.linksys.com.

Your computer is now connected to your Ethernet or Fast Ethernet net- work.

•If your computer runs Windows 98, go to page 9 now for driver installa- tion instructions.

•If your computer runs Windows 2000, go to page 20 now.

8