Phoneline + 10/100 USB Network Adapter
Windows 98 Installation & Setup
Overview
After physically installing the Phoneline + 10/100 USB Network Adapter in your computer, follow these instructions to install the network driver. The installation procedure for the network driver will vary slightly depending on which version of Windows 98 you are using, and on your current system con- figuration. If at any time during the installation you encounter problems, con- sult the Troubleshooting section on page 23.
Installing the USB Network Adapter’s Driver
After installing the HomeLink + 10/100 USB Network Adapter, follow the instructions below to install the adapter’s software into your Windows 98 computer.
1.If you haven’t already, start up your computer.
2.Windows 98 will automatically detect the presence of the LINKSYS USB Adapter hardware in your computer.
3.Slide the Linksys Driver Disk into your floppy drive while the Add New Hardware Wizard window is visible. Click Next.
9