Phoneline + 10/100 USB Network Adapter
click on Start, Settings, Control Panel, then open Network and click on the Configuration tab. Highlight
•Click on the NetBIOS tab. Put a check next to I want to enable NetBIOS over IPX/SPX and click OK. Click OK again.
•After Windows finishes copying the appropriate files, restart your com- puter. When you’ve returned to the desktop, open Network Neighborhood or my network places and look for the other PCs on your network.
8.In Network Neighborhood, I can only see some of the computers.
•Choose Start, Find, Computer and type the name of the computer in the window that comes up and click Find Now.
•Now make sure that the you are using the same protocol(s) and work- group name on computers. To do this, click Start, Settings, Control Panel on two computers running different Windows operating systems. Click on the Network icon, choose the Configuration tab, then click on the Identification tab for Workgroup name. Compare the protocols on both computers and make sure that they are the same. If any protocols are missing, refer to page 34 to install any needed protocol(s).
•Ensure that File & Print sharing is enabled on every computer.
9.Network Neighborhood is empty.
•Verify that your Microsoft Client is installed. See the Windows 98 setup instructions in this guide for directions.
•Verify that you have logged in correctly. Refresh the screen by pressing F5 several times.
25