Archos 500973 Protected Networks WEP, WPA or WPA2 KEY, Key format for WEP networks only

TV+ MANUAL V1.0 MAIN SETTINGS > P. 51

*Most networks support DHCP.

•+HVJGPGVYQTMPGGFUVQDGEQPÒI- ured manually, use the left/right ar- rows to select the “Manual” setting on the “&RQ¿JXUDWLRQ” parameter.

•Other parameters will appear: the required information can be ob- tained from the person who man- ages the network.

9JGP [QW JCXG ÒPKUJGF GPVGTKPI CNN VJG KPHQTOCVKQP UGNGEV VJGmConnect” button, and your ARCHOS will connect to this network, provided the signal is strong enough.

Protected Networks (WEP, WPA or WPA2 KEY)

•Protected networks require an en- cryption key to connect.

•The type of key (WEP, WPA or WPA2) will be detected automati- cally by your device.

•The rest of the required information can be obtained from the person who manages the network.

You will have to specify the following settings:

“Key length” (for WEP networks only)

-VJGCWVJGPVKECVKQPMG[ECPDGEJCTCEVGTUNQPI DKVQTEJCTCEVGTUNQPI DKV

“Key format” (for WEP networks only)

- in some cases you may need to change the key format in order to enter a pass- phrase/password. See the documentation that came with your WiFi router or modem.

“Key” (WEP or WPA)

-press OK, enter the encryption key using the remote control’s keyboard and press OK again to validate.

“Authentication” (for WEP networks only)

- the network’s authentication method can be based on an “Open System (de- fault)” or a “Shared Key”.