TV+ | MANUAL V1.0 | STARTING UP > P. 6 |
THE REMOTE CONTROL
•You will need the remote control in order to control your ARCHOS TV+.
•Your ARCHOS device has an infrared re- ceiver located on the front of the device, on the left side (next to the LED indica- tors). Point the supplied remote control towards the infrared receiver.
1.This part of the remote control is used for the Web Browser.
Use the direction pad to move the cursor that appears on the screen.
Pressing this button will activate 2 modes at the same time:
-the “left button lock” mode: the direction pad will act as if you moved a mouse while holding its left button at the same time. It will allow you, for example, to use sliders or other dragging controls.
-the navigation buttons, at the top right, will allow you to move from
QPGNKPMÒGNFVQCPQVJGT PQTOCNN[VJG[UETQNNVJGRCIGWRFQYP
Press again to disable these 2 modes.
This button is like a mouse’s left button. Depending on where you are in the interface, it will allow you to open a link, execute a function, etc.
This button is like a mouse’s right button. Depending on where you are in the interface, pressing this button will display a contextual menu.
2.These are the main buttons:
Navigation buttons: move from one item to another
Enter/Accept or Play/Pause/Resume
Exit button: Escape/Back/Stop
Up Accelerator button: